Allicdata Part #: | E-TA2012T4DBN3-ND |
Manufacturer Part#: |
E-TA2012 T 4DB N3 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 4 DB |
More Detail: | RF Attenuator 4dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 4DB N3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
The E-TA2012 T4DB N3 is an attenuator used in electric circuits.
An attenuator is a device used to reduce the power of a signal without creating a great amount of distortion. It is used for the purpose of controlling the amplitude of a signal, achieving a balance between two signals and reducing noise within a signal. Attenuators are a key component in many electronic system designs as they play an important role in impedance matching, power regulation and signal conduction.
The E-TA2012 T4DB N3 attenuator is made up of two terminals, each connected to its respective circuit load. The two terminals are connected to a resistor that is utilized to absorb the unwanted energy present in the signal. This resistor is placed between the two terminals in order to provide the desired attenuation. It can be either a single-turn or multi-turn resistor depending on the desired level of attenuation. When the terminals are connected, the signal will be reduced and the resistor will absorb the energy.
The E-TA2012 T4DB N3 attenuator is designed to reduce the volume or power of a signal while maintaining the fidelity of the original signal. It is also designed to operate in a wide variety of applications, including audio, video, telecommunications, and RF transmission systems. The device is made of high-grade materials, ensuring durability and precise performance. In addition, the E-TA2012 T4DB N3 attenuator provides excellent noise reduction allowing for clean and uninterrupted signal transmissions.
The E-TA2012 T4DB N3 attenuator is a valuable tool for engineers and designers as it enables them to design systems with higher quality audio and video signals at lower cost. Furthermore, this type of attenuator provides the ability to adjust the attenuation level with one single device, making it a great choice for applications requiring low-level signal amplification. The attenuator is an important component in any electronic system and the E-TA2012 T4DB N3 attenuator provides the ideal solution for reducing noise and providing clean signals.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...