Allicdata Part #: | E-TA2012T4DBN8-ND |
Manufacturer Part#: |
E-TA2012 T 4DB N8 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 4 DB |
More Detail: | RF Attenuator 4dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 4DB N8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic components used in a variety of electrical applications. E-TA2012 T 4DB N8 is one of the most common attenuators used in industrial and commercial settings. It has a wide range of applications and its working principle will be discussed in this article.
At the heart of attenuators are different types of resistors. The E-TA2012 T 4DB N8 attenuator is a four-diode bridge type attenuator. The four diodes which make up the bridge are connected in series and parallel circuits, so that when a signal enters the bridge, the current flowing in the direction of the signal is decreased, resulting in a smaller amplitude of the signal when it exits the bridge. This is the basic principle behind the attenuator and this type of attenuator is often referred to as a voltage divider.
E-TA2012 T 4DB N8 attenuators are typically used in sophisticated applications such as industrial production, commercial broadcasting, medical instrumentation and military communications. Because of their accuracy and stability, these particular attenuators are particularly well-suited for those applications that require precise attenuation. For instance, in broadcasting applications, attenuators are used to adjust the level of signals to match the transmitter output power. In medical instrumentation, it is used to ensure that the signals are within the range and do not exceed the sensitivity of the measuring equipment. In military radio communications, the attenuator is used to reduce certain radio frequencies that have adverse effects on reception.
The E-TA2012 T 4DB N8 attenuator is particularly well-suited for those applications that require accurate attenuation, because it has a flatter frequency response over the entire useful band with high accuracy and stability. This means that the attenuator can reduce the signal level with minimal distortion and without significantly disrupting the overall frequency response of the signal. It also has a high level of input impedance with low mismatch over the range of the attenuator, which makes it ideal for impedance matching applications.
In applications where the attenuation needs to be adjusted on the fly, the E-TA2012 T 4DB N8 attenuator is an ideal solution. With its high level of elements and robustness, it can be adjusted quickly and accurately. This makes it perfect for uses where time is critical, such as in production processes or emergency broadcasting. In addition, the attenuator\'s technology allows it to be mounted without requiring any additional components or wiring.
The E-TA2012 T 4DB N8 attenuator is a great choice for various industrial and commercial applications. Its four-diode bridge system offers higher levels of accuracy and stability than other types of attenuators and it is particularly useful in applications that require precision attenuation. Additionally, its ability to be adjusted quickly and easily is also a great advantage for those who need to change the settings of the signal quickly and accurately.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...