Allicdata Part #: | E-TA2012T5DBN2-ND |
Manufacturer Part#: |
E-TA2012 T 5DB N2 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 5 DB |
More Detail: | RF Attenuator 5dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 5DB N2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 5dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electrical circuits that reduce the amplitude of a signal without distorting it. They are commonly used in electronic control, audio, and video systems to reduce the volume or signal strength. The E-TA2012 T 5DB N2 is an RF Attenuator with a range from 0 dB to 5 dB and a frequency range of 0.2 MHz to 18000 MHz.
What is an E-TA2012 T 5DB N2?
The E-TA2012 T 5DB N2 is an RF Attenuator built specifically for RF signals. It is a variable Attenuator, meaning it is capable of adjusting the amount of attenuation needed. This allows for a greater control of the signal strength, allowing the user to obtain the desired results.
Application Field of an E-TA2012 T 5DB N2
The E-TA2012 T 5DB N2 is typically used in high frequency applications such as RF signals, where accuracy and control of the signal is needed. It is perfect for situations where signal strength needs to be controlled without distorting or affecting the signal quality. Some examples of applications this device is used in include:
- Cellular networks
- Broadcast radio
- Satellite systems
- Microwave systems
Working Principle of an E-TA2012 T 5DB N2
The E-TA2012 T 5DB N2 works on the principle of using power dividers and resistors to attenuate the signal. A power divider sends the signal to two separate paths, one path is for the signal that needs to be attenuated, while the other is for the signal that needs to remain unaffected. The attenuated signal is then sent to a series of resistors which further reduce the signal strength. This means the signal can be attenuated in more granular steps.
Features of an E-TA2012 T 5DB N2
The E-TA2012 T 5DB N2 has some key features that make it a great choice for RF attenuation. Some of the features are as follows:
- Frequency range from 0.2 MHz to 18000 MHz
- Attenuation range from 0 dB to 5 dB
- High control accuracy (0.2 dB per step)
- Good temperature performance
- Small size and lightweight
The E-TA2012 T 5DB N2 can be used in a variety of settings and situations that require precision control over the signal strength. The accuracy of the device allows for precise control with minimal signal distortion, and the range of frequencies makes it a versatile and flexible option.
Conclusion
In conclusion, the E-TA2012 T 5DB N2 is a highly accurate and versatile RF attenuator that is capable of operating over a wide range of frequencies. Its features make it a great choice for applications that require precise control over signal strength without distorting the signal. The device is well suited for cellular networks, broadcast radio, satellite systems, and microwave systems.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...