Allicdata Part #: | E-TA2012T5DBN6-ND |
Manufacturer Part#: |
E-TA2012 T 5DB N6 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 5 DB |
More Detail: | RF Attenuator 5dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 5DB N6 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 5dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
An attenuator is an electronic device that reduces the amplitude of an electrical signal without distorting its waveform. It is important in applications where signal voltage needs to be adjusted, or where unwanted noise needs to be filtered out. The E-TA2012 T 5DB N6 attenuator is a popular model that is widely used in industrial, automotive, medical, and consumer electronics. This article provides an overview of the E-TA2012 T 5DB N6 attenuator, its application fields, and working principle.
Application Fields
The E-TA2012 T 5DB N6 attenuator is used in a variety of applications, such as industrial robotics, automotive electronics, medical imaging, and consumer audio/video systems. In industrial robotics, the attenuator is used to control the electrical signals that power motors and actuators, thereby controlling the speed and direction of movement. In automotive electronics, it is used to filter out unwanted noise and adjust signal voltages for proper functioning of various sensors and controllers.
In medical imaging, the E-TA2012 T 5DB N6 is used to adjust the gain of low-level signals coming from MRI, CT, and ultrasound imaging systems. In consumer audio and video systems, the attenuator helps reduce the signal level of the audio or video source before it is amplified by the system\'s amplifiers. Ultimately, this ensures that the audio or video signal is able to be effectively reproduced at a desired level of volume.
Working Principle
The E-TA2012 T 5DB N6 attenuator works by changing the values of three resistors which are placed in series with the signal. The combination of resistors creates a resistance network which reduces the signal level. One of the resistors is adjustable, making it possible to precisely control the amount of signal reduction.
The E-TA2012 T 5DB N6 attenuator also uses a capacitor, which is wired in parallel with the adjustable resistor and helps to smooth out any bumps or irregularities in the signal waveform. The attenuator also employs two varistors, which are nonlinear, switchable resistors that prevent the signal voltage from exceeding a certain level.
The electrical design of the E-TA2012 T 5DB N6 attenuator is such that it can handle signals in the range of 0-50 volts and frequencies up to 1 MHz. These features allow it to be used in a wide variety of applications, from automotive to medical imaging.
Conclusion
The E-TA2012 T 5DB N6 attenuator is a versatile and reliable device that is used in many industrial, automotive, medical, and consumer applications. It works by changing the values of three resistors, a capacitor, and two varistors, which allow it to accurately reduce the amplitude of an electrical signal without distorting its waveform. This article has provided an overview of the E-TA2012 T 5DB N6 attenuator and how it functions in different applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...