Allicdata Part #: | E-TA2012T6DBN6-ND |
Manufacturer Part#: |
E-TA2012 T 6DB N6 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 6 DB |
More Detail: | RF Attenuator 6dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 6DB N6 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 6dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The E-TA2012 T 6DB N6 is a type of attenuator. An attenuator is a device designed to reduce the power level of an electrical signal, without significantly affecting the waveform of the signal. It works by absorbing the electrical energy from the signal in one form or another, thus reducing the amplitude or strength of the signal.
The E-TA2012 T 6DB N6 is a variable attenuator, which can be adjusted to any signal level from 0.15V to 90V DC. This type of attenuator is commonly used in radio frequency (RF) applications, such as microwave communication systems and satellite communications. The device is designed to provide consistent attenuation across a wide range of frequencies. It is also suitable for audio applications.
The basic working principle of the E-TA2012 T 6DB N6 is that the device consists of a series of resistors and capacitors connected in parallel. When a signal is applied to the device, it is attenuated due to the resistance of the resistors and capacitors. The amount of attenuation is determined by the values of the resistors and capacitors. By adjusting the values of the resistors and capacitors, the amount of attenuation can be varied, allowing the signal level to be adjusted as needed.
The E-TA2012 T 6DB N6 is designed to be used in a wide range of applications. It is suitable for both digital and analog systems, and can be used in a variety of noise reduction systems, such as noise cancelling headphones. It is also used in RF receivers, telecommunication systems and other electronic systems. The device is also used in musical instruments, such as guitar amplifiers, to reduce the amount of signal distortion.
The E-TA2012 T 6DB N6 is a versatile and reliable device, and is suitable for many types of electronic application. It provides consistent signal attenuation, and is designed to be reliable and durable. The device is easy to adjust and set up, making it a popular choice for many RF applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...