Allicdata Part #: | E-TA2012T9DBN1-ND |
Manufacturer Part#: |
E-TA2012 T 9DB N1 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 9 DB |
More Detail: | RF Attenuator 9dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 9DB N1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 9dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic devices used to reduce a voltage, current, or power in an electrical system. The E-TA2012 T 9DB N1 is one such attenuator that is designed for controlling high frequency (0.3 GHz – 6 GHz) signals. This article will explore the application fields and working principle of the E-TA2012 T 9DB N1.
The E-TA2012 T 9DB N1 attenuator is primarily used in transmit and receive paths of communications systems. It has excellent temperature stability and reliability due to its robust ceramic carrier. It is also used in many military applications, such as RADAR and sonar systems, due to its exceptional longevity. The attenuator also offers an accurate, repeatable setting with minimal variation over the life of the component. Furthermore, the E-TA2012 T 9DB N1attenuator is also suitable for use in industrial control and instrumentation applications.
The attenuator operates using the voltage division principle, where two resistors are connected in series, with a voltage tap connecting the two resistive elements. The amount of attenuation is determined by the ratio of the two resistors. In the case of the E-TA2012T 9DB N1, it is designed with two resistors with nominal resistance values of 100Ω/20Ω. As the 20Ω resistor is much smaller, it will draw less current, resulting in less power dissipation over the whole circuit. The voltage tap is placed at the midpoint between the two resistors, and this midpoint will act as the output of the attenuator. The output voltage of the E-TA2012 T 9DB N1 is adjustable, typically from 0 to – 9dB. This allows the user to adjust the amount of attenuation, which enables the user to precisely control the signal level in the circuit.
The E-TA2012 T 9DB N1 attenuator also features an anti-parallel diode protection circuit. This circuit helps to protect the attenuator from over-voltage conditions that occur during transmission. The diode circuit will also act as a failsafe in the event of a component failure, reducing the impact of any damage or downtime.
In conclusion, the E-TA2012 T 9DB N1 is a versatile, reliable, and robust attenuator that is well suited for a wide range of applications. Its adjustable output voltage, temperature stability, and diode protection make it an ideal component for a variety of systems, from communications and industrial equipment, to military RADAR and sonar systems. Its voltage division principle of operation ensures that it is easily controllable, and the two resistors offer a high degree of power dissipation and signal protection.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...