Allicdata Part #: | E-TA32161DBN8-ND |
Manufacturer Part#: |
E-TA3216 1DB N8 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 1206 SMD 1 DB |
More Detail: | RF Attenuator 1dB 0Hz ~ 3GHz 50 Ohms 100mW 1206 (... |
DataSheet: | E-TA3216 1DB N8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 100mW |
Impedance: | 50 Ohms |
Package / Case: | 1206 (3216 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are passive devices used to decrease the intensity or amplitude of an electrical signal. They are commonly used in a variety of applications including communication systems, signal processing, and power systems. The E-TA3216 1DB N8 attenuator is a low-cost unit that is designed to reduce the signal strength of a signal passing through it. This attenuator is applicable in many applications, such as radio broadcast, monitoring, industrial control, communications equipment, and scientific instruments.
The E-TA3216 1DB N8 attenuator is a wideband, low insertion loss device that can operate in a wide range of frequencies from DC up to 10 GHz. It is constructed from two elements, the attenuator element and the termination element. The attenuator element consists of a series of FET transistors. The termination element provides isolation and termination of any unused ports.
The working principle of the E-TA3216 1DB N8 attenuator is based on the concept of impedance mismatching. When a signal passes through a network, the self-impedance of the signal changes. When the impedance of the signal is mismatched from that of the network, it causes the signal to be attenuated. The E-TA3216 1DB N8 attenuator utilizes this concept by creating an impedance mismatch between the signal entering the device and the device itself, thus causing the signal passing through to be attenuated.
The E-TA3216 1DB N8 attenuator is designed to minimize noise and distortion by using wide-bandwidth FET transistors in its construction. It also is designed to be highly efficient, and its insertion loss is minimized to reduce signal attenuation. The attenuator is also designed to be both temperature-stable and reliable, allowing it to be used in a wide range of applications.
The E-TA3216 1DB N8 attenuator is a versatile and valuable device for many applications. It is designed for use in radio broadcast, monitoring, industrial control, communications equipment, and scientific instruments. It is also useful for applications such as instrumentation, power regulation, and attenuating RF signals. This device can be used to precisely and accurately adjust the power levels of signals, providing reliable performance and precise control of data signals. It is an ideal choice for many applications due to its low insertion loss and high attenuation accuracy.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...