E-TA3216 2DB N6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators

The E-TA3216 2DB N6 is a type of attenuator used in audio and telecommunications applications. It is a passive device that is used to reduce the level of a signal without changing its waveform. This type of attenuator is used to reduce the level of a signal to the desired level without distortion. It is also used to control the level of a signal in order to prevent overload or excessive gain. It is commonly used in amplifiers, mixers, line-level converters, and other audio equipment.

The E-TA3216 2DB N6 attenuator uses a combination of resistors and capacitors to reduce the level of a signal. The resistors reduce the level of the signal, while the capacitors act to smooth out any distortion. The combined value of the resistors and capacitors determines the amount of reduction in level that the attenuator provides. The attenuator has a 3 dB step attenuation setting, which is adjustable by rotating a control knob. The control knobs are usually labeled with numbers indicating the amount of attenuation.

The E-TA3216 2DB N6 attenuator is primarily used in audio and telecommunications applications. It can be used to reduce the level of a signal without significant distortion. It is commonly used in amplifiers, mixers, and line-level converters. It is also used to control the level of a signal in order to prevent overload or excessive gain. The attenuator provides a 3 dB step attenuation that is adjustable by rotating the control knob.

The E-TA3216 2DB N6 attenuator is designed for a balanced, low-impedance (10 ohm) line. This helps to reduce the effects of crosstalk and reduces any unwanted feedback. It is designed to be easily mounted and wired, making it an ideal choice for applications such as mixers, amplifiers, and line-level converters. The attenuator provides excellent performance and reliability in a wide variety of conditions.

The working principle of the E-TA3216 2DB N6 attenuator is based on the voltage divider circuit. The circuit consists of two resistors and a capacitor, connected in series. The first resistor is called the input resistor and is used to reduce the level of the incoming signal. This allows the level of the signal to be reduced without distortion. The second resistor is called the output resistor and is used to control the level of the signal that is fed back to the inputs. The capacitor is connected between the two resistors and acts as a low-pass filter, allowing only low-frequency signals to pass and reducing any high-frequency signals.

In conclusion, the E-TA3216 2DB N6 is an attenuator used in audio and telecommunications applications. It reduces the level of a signal without distortion, allowing it to be used in applications such as mixers, amplifiers, and line-level converters. The E-TA3216 2DB N6 has a 3 dB step attenuation that is adjustable by rotating a control knob. Its working principle is based on the voltage divider circuit, which uses two resistors and a capacitor, connected in series. The attenuator provides excellent performance and reliability in a wide range of conditions.

The specific data is subject to PDF, and the above content is for reference