Allicdata Part #: | E-TA32162DBN8-ND |
Manufacturer Part#: |
E-TA3216 2DB N8 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 1206 SMD 2 DB |
More Detail: | RF Attenuator 2dB 0Hz ~ 3GHz 50 Ohms 100mW 1206 (... |
DataSheet: | E-TA3216 2DB N8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 2dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 100mW |
Impedance: | 50 Ohms |
Package / Case: | 1206 (3216 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are circuit elements used to control voltage levels in electronic equipment. E-TA3216 2DB N8 is a high-accuracy attenuator that is often used in audio and video applications. It has a low loss, low thermal drift and low mismatch, making it suitable for a range of applications. The characteristics of E-TA3216 2DB N8 make it suitable for applications such as signal conditioning, signal level control and power level control.
Application Fields
- Battery-powered devices – The low loss and low thermal drift of the E-TA3216 2DB N8 make it an ideal choice for implementing voltage control in battery-powered devices.
- Audio/video equipment – The low loss and low mismatch make the E-TA3216 2DB N8 a great choice for controlling signal levels in audio and video equipment.
- Electronic circuit design – The low thermal drift and low mismatch make the E-TA3216 2DB N8 ideal for applications that require precise voltage control in electronic circuit design.
- Power management – The low thermal drift and low mismatch make the E-TA3216 2DB N8 an effective way of managing power levels in power management applications.
Working Principle
The E-TA3216 2DB N8 is a three-terminal variable attenuator that provides variable attenuation between two of its terminals when a control voltage is applied to its third terminal. The control signal is applied to the attenuator\'s control terminal, which is usually connected to a potentiometer to adjust the desired attenuation. The attenuator then responds to the control voltage by varying its resistance between its two output terminals to achieve the desired attenuation. The min and max attenuation levels are determined by the potentiometer setting. The attenuator provides an impedance transformation between its two output terminals, resulting in a voltage drop across its output terminals that results in a reduction in gain of the signal passing through the device.
The E-TA3216 2DB N8 is a passive device, meaning it requires no additional power to operate. It can be used in either linear or logarithmic operation depending on the application. In linear mode, the attenuation is evenly distributed along the voltage range. In logarithmic mode, the attenuation is focused around a certain point along the voltage range.
E-TA3216 2DB N8 is an ideal choice for applications which require precise control over signal levels with the minimum amount of power and thermal drift. Its low mismatch and low loss characteristics make it suitable for use in a range of applications. The E-TA3216 2DB N8 is a versatile, reliable, and cost-effective solution for voltage control.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...