Allicdata Part #: | E-TA32164DBN5-ND |
Manufacturer Part#: |
E-TA3216 4DB N5 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 1206 SMD 4 DB |
More Detail: | RF Attenuator 4dB 0Hz ~ 3GHz 50 Ohms 100mW 1206 (... |
DataSheet: | E-TA3216 4DB N5 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 100mW |
Impedance: | 50 Ohms |
Package / Case: | 1206 (3216 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic components used to reduce the power of a signal without significantly distorting the signal. The E-TA3216 4DB N5 is a type of attenuator specifically designed for industrial electronics applications. This attenuator has a wide frequency range, low insertion loss, and high linearity which makes it an ideal choice for industrial environments.
The E-TA3216 4DB N5 is a low-loss, high linearity attenuator. It is designed to reduce signal power while minimizing distortion. The attenuator is composed of a series of elements that have different power levels. These elements are combined in a circuit pattern that forms an electrical ladder network. This ladder network is used to calculate the attenuation of the signal with different frequencies. The E-TA3216 4DB N5 is available in different attenuation levels ranging from 3db to 16db.
The E-TA3216 4DB N5 can be used in a wide range of applications including high frequency transmission systems, audio systems, RF communication systems, and measurements instruments. In high frequency transmission systems, the attenuator is used to reduce the level of the transmitted signal before it reaches the receiving end. This prevents any potential signal overloads from occurring. In audio systems it is used to reduce any unwanted noise or distortion. In RF communication systems, the attenuator is used to reduce signals to a level that is within the safety limits. In measurements instruments, the attenuator is used to measure the strength of a signal without overloading the instrument.
The E-TA3216 4DB N5 attenuator operates on the principle of resistive division. This is a type of electrical network that uses the ratio of two resistors to reduce the level of the voltage or the current that flows through the network. In this case, the attenuator uses a series of elements in a ladder configuration to attenuate the signal. The electrical resistance of each element is different, which determines the amount of attenuation applied to the signal. As the frequency of the signal increases, the amount of attenuation increases.
The E-TA3216 4DB N5 is a versatile and reliable attenuator with a wide frequency range and high linearity. It is suitable for a variety of applications and provides a low insertion loss, which ensures that the signal is not distorted. This makes the E-TA3216 4DB N5 the ideal choice for industrial electronics applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...