Allicdata Part #: | E-TA3216T1DBN6-ND |
Manufacturer Part#: |
E-TA3216 T 1DB N6 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 1206 SMD 1 DB |
More Detail: | RF Attenuator 1dB 0Hz ~ 3GHz 50 Ohms 100mW 1206 (... |
DataSheet: | E-TA3216 T 1DB N6 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 100mW |
Impedance: | 50 Ohms |
Package / Case: | 1206 (3216 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
:An attenuator is a device used to reduce the strength of a signal. The E-TA3216 T 1DB N6 is an example of an attenuator used in various applications. It is a 1 watt, two-way, fixed attenuator that is available in a variety of attenuation levels ranging from 3 dB to 40.5 dB. In order to understand the applications of the E-TA3216 T 1DB N6 and how it works, it is important to look at the working principle of attenuators in general.
The working principle of an attenuator is quite simple. In its simplest form, the attenuator is composed of two resistors, one of which has a higher resistance than the other. The resistors are connected in series between the input and output of a signal. As the signal is passed through, some of the energy is absorbed by the high resistance resistor and the signal’s strength is reduced. The amount of energy that is absorbed is dependent on the ratio of the two resistors, and the goal is usually to reduce the signal to a predetermined level.
The E-TA3216 T 1DB N6 is usually used in applications that require a high level of signal attenuation. The attenuator can be used in a variety of settings, such as radio frequency amplifiers, mobile phone base stations, and high power television transmitters. It can also be used in applications such as automotive, medical, and home audio systems. The attenuator can be used to help reduce the power of signals without having to reduce the gain of the system.
The E-TA3216 T 1DB N6 has a few advantages over other attenuators. It has a relatively low insertion loss, which is the loss of power that occurs as the signal passes through the device. It also has good thermal stability and a wide frequency range. Additionally, the device is manufactured to exact tolerances to ensure consistent performance.
In summary, the E-TA3216 T 1DB N6 is a two-way, fixed attenuator that is used in a variety of applications. The device works by passing a signal through two resistors of differing resistances, where some of the energy is absorbed in order to reduce the power of the signal. The attenuator has a low insertion loss, a wide frequency range, and good thermal stability. Because of these advantages, the device is commonly used in applications such as radio frequency amplifiers, mobile phone base stations, high power television transmitters, automotive systems, and medical systems.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...