Allicdata Part #: | E-TA3216T4DBN8-ND |
Manufacturer Part#: |
E-TA3216 T 4DB N8 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 1206 SMD 4 DB |
More Detail: | RF Attenuator 4dB 0Hz ~ 3GHz 50 Ohms 100mW 1206 (... |
DataSheet: | E-TA3216 T 4DB N8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 100mW |
Impedance: | 50 Ohms |
Package / Case: | 1206 (3216 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic components that reduce gain by a certain amount. They are used in a variety of applications in order to control the level of an input signal. The E-TA3216 T 4DB N8 is one type of attenuator, which is designed to reduce the signal’s amplitude by a certain amount. This article will explain the applications and the working principle of this attenuator.
Applications of E-TA3216 T 4DB N8 Attenuator
The E-TA3216 T 4DB N8 attenuator is used in a variety of electronic applications, including radar, avionics, and instrumentation systems. It is typically used for data communication and signal processing, where a signal needs to be attenuated by a certain amount. It is also used in audio systems, such as headphones and home theater systems, where the signal needs to be reduced to a more manageable level. Additionally, it is used in radio frequency (RF) systems, where the signal is attenuated to prevent it from overloading the receiving device.
The E-TA3216 T 4DB N8 attenuator is also commonly used in laboratories and test systems for signal characterization and analysis. It can be used to adjust the gain of signals and to cancel out signal noise, which is essential for accurate measurements. Finally, it is used in medical imaging and testing equipment, where the signal must be attenuated to avoid interference and ensure accurate readings.
Working Principle of the E-TA3216 T 4DB N8 Attenuator
The E-TA3216 T 4DB N8 attenuator works by introducing an impedance into the signal path. This impedance is usually in the form of a resistor or a capacitor, which reduces the signal’s amplitude as it passes through. Additionally, this attenuator can be configured to provide specific attenuation levels, allowing for precise control over the signal’s amplitude. It is capable of handling input signals up to 30 V, and the maximum attenuation level is 4 dB.
The attenuator also works by introducing a phase shift into the signal path, which reduces the peak-to-peak voltage of the signal. The phase shift also helps to reduce the signal noise, which is necessary for accurate measurements. Finally, the attenuator also works by introducing a type of frequency response, which determines the amount of gain reduction for each frequency.
In summary, the E-TA3216 T 4DB N8 attenuator is an essential component in a variety of electronic applications. It is used to reduce the signal’s amplitude, as well as to reduce signal noise and provide precise control over the signal’s gain. Furthermore, it works by introducing an impedance into the signal path, which reduces the signal’s amplitude, introduces a phase shift, and provides a type of frequency response. This attenuator is an invaluable tool for many types of electronic applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...