Allicdata Part #: | E-TDA7478AD-ND |
Manufacturer Part#: |
E-TDA7478AD |
Price: | $ 0.51 |
Product Category: | RF/IF and RFID |
Manufacturer: | STMicroelectronics |
Short Description: | IC DEMODULATOR SGL RDS 16TSSOP |
More Detail: | RF Demodulator IC 16-TSSOP (0.173", 4.40mm Width) |
DataSheet: | E-TDA7478AD Datasheet/PDF |
Quantity: | 1000 |
1920 +: | $ 0.46589 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Function: | Demodulator, Filter |
LO Frequency: | -- |
RF Frequency: | -- |
P1dB: | -- |
Gain: | 20dB |
Noise Figure: | -- |
Current - Supply: | 7.5mA |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Package / Case: | 16-TSSOP (0.173", 4.40mm Width) |
Supplier Device Package: | 16-TSSOP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
E-TDA7478AD is a Direct Conversion RF Demodulator which can speed up the communications in different applications and also provides considerable power-saving. This chip can be applied to various RF demodulation tasks, such as downlink (Received) signal demodulation, wireless backhaul etc.
E-TDA7478AD is an integrated radio-frequency (RF) demodulator designed for high performance applications that require low power consumption and high data rate. This chip allows for the efficient demodulation of RF signals at 6 - 10 GHz frequency bands, which can be used in wireless LAN transmission, wireless video transmission, cell-phone-based communications, etc. It is available in two different packages, namely the 8-lead, dual in-line package (DIP) and the 8-lead tiny quad flat package (TQFP).
In regard to its operating principle, E-TDA7478AD is very straightforward. Basically, it acts as a radio receiver and demodulates incoming RF signals into digital data. The first stage of the signal processing is the reception of the radio frequency (RF) signal, which is then converted into an Intermediate Frequency (IF) signal by the built-in mixing circuit. After that, the IF signal is converted into the baseband signal by the baseband signal processing circuit in the chip. The baseband signal processing circuit will also do the necessary frequency translation, data rate conversion, and gain control of the output signal. The final stage of the signal processing is the data demodulation, which will convert the analog baseband signal into digital data in a low-power, low-noise and low-impact process.
Due to its low power consumption, high data rate, and integration of all the required RF signal processing components, E-TDA7478AD is especially advantageous for applications that require data transmission in applications such as wireless LAN, wireless video, cellular telephony, etc. Its broad applications make it a great choice for anyone who needs a reliable and efficient RF demodulation solution.
In conclusion, E-TDA7478AD can be used in a wide variety of applications, including downlink (Received) signal demodulation, wireless backhaul, wireless LAN transmission, wireless video transmission, cellular telephony, etc. Its efficient and low power consumption allows for reliable performance in all these applications. Therefore, E-TDA7478AD is definitely a great choice for anyone who needs a reliable, efficient and low-power RF demodulation solution.
The specific data is subject to PDF, and the above content is for reference
IC RDS DEMODULATION 140MW MFP16RF Demodu...
IC IF DEMODULATOR DGTL 40HVQFNRF Demodul...
IC DEMODULATOR RDS/RBDS SO16RF Demodulat...
IC DEMODULATOR RDS/RBDS SO16RF Demodulat...
IC IF AMP/DEMOD 20-SOICRF Demodulator IC...
IC FM-IF AMPLIFIER 20-SOICRF Demodulator...