Allicdata Part #: | E2C-AK4A-ND |
Manufacturer Part#: |
E2C-AK4A |
Price: | $ 181.62 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Automation and Safety |
Short Description: | AMP 90-264VAC FOR E2C PROX |
More Detail: | Standard Sensor Amplifier |
DataSheet: | E2C-AK4A Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 165.11000 |
Series: | E2C |
Part Status: | Active |
Amplifier Type: | Standard |
Voltage - Supply: | 90 V ~ 264 VAC |
Output Type: | Transistor |
Current - Supply: | 55mA |
Operating Temperature: | -10°C ~ 55°C (TA) |
Mounting Type: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Amplifiers are key components in many electronic systems and devices. The E2C-AK4A amplifier is a high-performance, low-cost amplifier that is suitable for a wide range of applications, such as audio, communications, instrumentation, and hybrid systems. It is capable of delivering high output current and high power levels, with low distortion and noise characteristics.
The design of the E2C-AK4A amplifier incorporates several advanced features, which help to reduce size, power consumption, and cost. A differential input stage provides low distortion and low noise, while a feedback loop improves overall linearity. The symmetrical power supply configuration eliminates ground interface problems, and a high efficiency closed loop output stage provides improved dynamic range. The E2C-AK4A can operate over a wide range of supply voltages, from 8 V to 32 V, allowing it to be used in a variety of applications.
The E2C-AK4A amplifier uses a combination of conventional and switched power supply components to provide power to the various amplifier stages. The switched power supply architecture operates at a much higher efficiency than traditional linear power supplies, reducing costs and maintaining better system thermal performance. The switched power supplies are controlled by a master microcontroller, which can be used to control the various parameters of the amplifier.
The E2C-AK4A amplifier is designed around a three-stage topology. The first stage consists of a differential input stage, which provides low noise and low distortion. The second stage is a low-noise amplifier that provides gain and high-pass filtering. The third stage is a closed-loop high-efficiency output stage that provides the necessary power for the final output. The amplifier also includes a feedback loop, which improves linearity and reduces distortion.
In addition to the analog signal path, the E2C-AK4A amplifier includes several digital features that improve its overall performance. The amplifier features an on-chip digital-to-analog converter (DAC) for improved distortion and noise performance. The DAC can be used to fine-tune the amplifier parameters. It also includes a digital signal processor (DSP) for signal conditioning, harmonic correction, equalization, and other tasks. Finally, the amplifier includes a serial port interface for setting various parameters, such as gain, frequency response, and power output. These digital features give the E2C-AK4A amplifier many of the features of more expensive amplifiers.
The E2C-AK4A amplifier is an efficient and cost-effective amplifier solution. Its ability to operate over a wide variety of supply voltages, its low power consumption, and its high performance make it suitable for a wide range of applications in audio, communications, instrumentation, and hybrid systems. The amplifier includes several advanced features, such as digital signal processing and a serial port interface, which make it a competitive choice for many consumer and industrial applications.
The specific data is subject to PDF, and the above content is for reference
NPN FO AMP LOW LIGHT OUTPUTStandard Sens...
AMP AC 4-20MA FOR E2CA-X10A/-5MStandard ...
DIGITAL LASER AMP CBL TYPE PNPGeneral Pu...
SENSOR IC TOUCH/PROXMTY 24SOICExternal I...
MODULEAnalog Output Sensor Amplifier Sur...
MODULEAnalog Output Sensor Amplifier Sur...