![E32-D12R Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
Allicdata Part #: | E32-D12R-ND |
Manufacturer Part#: |
E32-D12R |
Price: | $ 87.10 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Automation and Safety |
Short Description: | SENS FIBER HIGH FLEX 3MM DIA |
More Detail: | N/A |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 79.18470 |
Series: | E32 |
Part Status: | Active |
Sensing Method: | Reflective |
Sensing Distance: | 6.693" (170mm) |
Voltage - Supply: | -- |
Response Time: | -- |
Output Configuration: | -- |
Connection Method: | Cable |
Ingress Protection: | IEC IP67 |
Light Source: | -- |
Adjustment Type: | -- |
Operating Temperature: | -40°C ~ 70°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors have numerous applications in the field of industrial automation, and the E32-D12R is one of the most successful products in this field. It is a multipoint photoelectric proximity sensor that is designed for high speed, maximum accuracy, and low-cost operation. The E32-D sender and receiver use two LEDs and an LDR (Light Dependent Resistor) to detect motion and measure distances. This allows the E32-D12R to be used in a variety of applications, from industrial automation to robotics, automotive, and medical applications.
The E32-D12R consists of a sender and receiver pair that work together in an optical circuit. The sender emits a modulated LED light, which is then received by the receiver. The receiver uses an LDR to measure the intensity of the light received from the sender. The difference in intensity between the received light and a reference light can be used to set a threshold level, beyond which the signal is no longer considered valid. This enables the E32-D12R to work accurately in a variety of environmental conditions.
The sender/receiver pair of the E32-D12R can be used to detect objects in a variety of ways. For example, a single sender/receiver pair can be used for retro-reflective detection, where an object is detected when it reflects light back to the sender. The sender/receiver pair can also be used for diffuse detection, in which the object is detected when it disrupts the light from the sender/receiver pair. Finally, the sender/receiver can also be used for reflective detection, in which the object is detected when it reflects light off of its surface.
The E32-D12R has a number of advantages over other optical sensors, such as high speed and reliability. The E32-D12R is a low-cost, highly dependable sensor that is ideal for industrial automation and for a wide range of other applications. The E32-D12R is designed to be easy to install and use, and offers a high degree of accuracy and repeatability. With its robust design and reliable performance, the E32-D12R is sure to become an invaluable tool in any automation system.
The specific data is subject to PDF, and the above content is for reference
SYSTEM
![70156-2268 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
SYSTEM
![MS46SR-20-1130-Q2-10X-10R-NO-A Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
SYSTEM
![MS46LR-30-1745-Q1-15X-15R-NC-A Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
SYSTEM
![MS46LR-20-870-Q2-15X-15R-NC-FN Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
SYSTEM
![MS46SR-30-1045-Q1-30X-10R-NO-F Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
SYSTEM
![MS46SR-30-2095-Q2-30X-30R-NC-F Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)