Allicdata Part #: | E3T-ST24-M1TJ0.3M-ND |
Manufacturer Part#: |
E3T-ST24-M1TJ 0.3M |
Price: | $ 129.23 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Automation and Safety |
Short Description: | SENSOR PHOTOELECTRIC PNP |
More Detail: | N/A |
DataSheet: | E3T-ST24-M1TJ 0.3M Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 117.48200 |
Series: | E3T |
Part Status: | Active |
Sensing Method: | Through-Beam |
Sensing Distance: | 11.811" (300mm) |
Voltage - Supply: | 12 V ~ 24 V |
Response Time: | 1ms |
Output Configuration: | PNP - Open Collector/Dark-ON |
Connection Method: | Connector |
Ingress Protection: | IEC IP67 |
Light Source: | Red (650nm) |
Adjustment Type: | Adjustable |
Operating Temperature: | -25°C ~ 55°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors are widely used in the industrial automation sector, to detect and control objects or detect motion without making physical contact. One such type of optical sensor is the E3T-ST24-M1TJ 0.3M photoelectric sensor, which is used in industrial applications for non-contact determination of objects and detection of motion.
The E3T-ST24-M1TJ 0.3M is a photosensitive slot type optical sensor. It contains a GaAs infrared LED emitter and a beaded silicon phototransistor in a cylindrical body. It has a low profile design of only 0.3M in diameter, making it compatible with narrow spaces where other sensors would be difficult to install. It also uses a high-duty cycle LED emitter which is very resistant to wear and aging, making it highly reliable and suitable for long-term applications. The casing is also waterproof, making it suitable for use in a variety of environments such as outdoor and wet environments, and extreme temperatures ranging from -40°C to 70°C.
The E3T-ST24-M1TJ 0.3M is a DC output sensor with a switching range of 200 or less (depending on the sensing object). It is a highly reliable device with an operating life of up to 1 million cycles. Its main sensing function is presence detection, and it is commonly used for applications such as automation equipment, inspection lines, assembly machines, etc. It can also be used for counting, positioning and measuring applications.
In terms of operation, the E3T-ST24-M1TJ 0.3M works by shooting an infrared beam that is reflected when it hits a sensing object and is absorbed by the sensor. The sensor then translates the reflected light into an electrical signal, which is then compared to a set threshold. If the light level is above the threshold, the output switches to high (on-state). Conversely, if the light level falls below the threshold, the output switches to low (off-state). The sensing range of the sensor can be adjusted via a potentiometer on the device.
The E3T-ST24-M1TJ 0.3M is designed to meet the needs of the industrial automation sector. Its small size makes it ideal for narrow spaces, and its LED and phototransistor ensure high reliability. Its compatibility with a wide range of environments makes it a versatile workhorse for applications such as automation equipment, inspection lines, assembly machines, etc. Overall, this makes it an excellent choice for use in industrial applications.
The specific data is subject to PDF, and the above content is for reference
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM
SYSTEM