Allicdata Part #: | E3X-NT11-M1J0.3M-ND |
Manufacturer Part#: |
E3X-NT11-M1J 0.3M |
Price: | $ 240.88 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Automation and Safety |
Short Description: | AUTOTUNE FIBER AMP PIGTAIL CONN |
More Detail: | General Purpose Sensor Amplifier DIN Rail |
DataSheet: | E3X-NT11-M1J 0.3M Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 218.98800 |
Series: | E3X-N |
Part Status: | Active |
Amplifier Type: | General Purpose |
Voltage - Supply: | 12 V ~ 24 V |
Output Type: | NPN |
Current - Supply: | 50mA |
Operating Temperature: | -25°C ~ 55°C (TA) |
Mounting Type: | DIN Rail |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to E3X-NT11-M1J 0.3M
E3X-NT11-M1J 0.3M is an optical amplifier module manufactured by Omron Corporation. In terms of use, it belongs to the Amplifiers category. This module is mainly used for optical communication systems in industrial and academic research fields. It can effectively improve the signal transmission distance and availability while maintaining the signal transmission quality.
Application Field of E3X-NT11-M1J 0.3M
The E3X-NT11-M1J 0.3M amplifier is mainly used as a communication line amplifier in industrial and academic research fields. It can deliver long distance transmissions and use in very low power consumption applications. For instance, this amplifier can be applied in industrial automation systems, surveillance systems, fiber test and measurement systems, fiber laser systems, as well as in other optical communication situations. This amplifier can also be used in submarine fiber communication systems, subsea engineering projects, terrestrial fiber communication networks, and various other optical communication systems.
Working Principle of E3X-NT11-M1J 0.3M
The E3X-NT11-M1J 0.3M optical amplifier module is also known as an Erbium Doped Fiber Amplifier (EDFA). It employs an Erbium-doped fiber to amplify a signal using the stimulated emission process. The EDFA amplifies the signal by adding an energy level to the fiber. This added energy level is created by the stimulated emission process, which emits a photon from the fiber that is identical in frequency, phase and direction with the photon that triggered the process. This process can amplify the signal without introducing any noise.
The module contains two separate components: the gain block, and the isolator. The gain block is responsible for producing the amplified output signal while the isolator prevents the amplified signal from being fed back into the input. This prevents any oscillation from occurring. The gain block consists of the Erbium doped fiber which is pumped by a separate laser diode. This external laser diode provides the energy needed to stimulate the emission process.
The gain of the amplifier can be adjusted to vary the amount of signal enhancement. The gain block also includes a monitor port which allows for feedback control of the gain. This port can be used to measure the gain and adjust the amplifier appropriately. The gain can also be adjusted by changing the diode bias voltage.
Conclusion
The E3X-NT11-M1J 0.3M amplifier module is mainly used for industrial and research purposes and belongs to the amplifiers category. This amplifier module employs an Erbium-doped fiber to amplify a signal using the stimulated emission process. It consists of a gain block and an isolator and can be used in various optical communication situations. The gain of the amplifier is adjustable by changing the diode bias voltage. With this module, signal transmission distances can be effectively improved and the transmission quality can be maintained.
The specific data is subject to PDF, and the above content is for reference
NPN FO AMP LOW LIGHT OUTPUTStandard Sens...
AMP AC 4-20MA FOR E2CA-X10A/-5MStandard ...
DIGITAL LASER AMP CBL TYPE PNPGeneral Pu...
SENSOR IC TOUCH/PROXMTY 24SOICExternal I...
MODULEAnalog Output Sensor Amplifier Sur...
MODULEAnalog Output Sensor Amplifier Sur...