EAC-10-102-D

Series:	EAC
Part Status:	Active
Filter Type:	Single Phase
Configuration:	Single Stage
Voltage - Rated DC:	250V
Voltage - Rated AC:	250V
Voltage - Rated AC (Phase to Ground/Neutral):	250V
Current:	10A
Frequency - Operating:	--
Applications:	General Purpose
Approvals:	cURus, VDE
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	DIN Rail
Termination Style:	Terminal Block
Inductance:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EAC-10-102-D Power Line Filter Modules

The EAC-10-102-D is a power line filter module designed to provide protection from electrical noise in power distribution systems. It is designed to filter out unwanted electrical noise caused by switching, motors, and other inductive loads. This filter can be used in a variety of applications including industrial, commercial, and residential applications.

Design and Construction

The EAC-10-102-D is constructed of an aluminum die-cast chassis with a stainless steel plate on the front. It has three filters - two common-mode and one differential-mode. The common-mode filters provide protection from line frequency interference and transient over-voltage spikes. The differential-mode filter is used to prevent harmonic distortion. The filter also includes a two-stage low-pass filter to reduce radio frequency noise.

Installation and Operation

The EAC-10-102-D power line filter module can be installed quickly and easily with no special equipment required. All connections are made to the terminals on the rear of the module. The filter module is designed to be mounted in the electrical panel or directly on the main power distribution board. The filter module should be installed in an area that is away from any heat sources.The EAC-10-102-D is designed to operate in temperatures between -20°C and 55°C and is rated for up to a maximum input voltage of 240VAC. It is designed to provide maximum protection up to frequencies of 2kHz.

Working Principle

The EAC-10-102-D power line filter module works by using the reactive components of the filter to cause a short circuit in the circuit path. This short circuit creates a high impedance of the circuit which blocks any electrical noise from entering the circuit. The filter also actively maintains the operating voltage on the load and keeps it to within an acceptable range.The filter actively filters out any unwanted electrical noise by using two stages of filtering. The first stage consists of the common-mode and differential-mode filters while the second stage is the two-stage low-pass filter. This combination of filters ensures that any unwanted electrical noise is filtered out while allowing useful signals to pass through. The filter also actively maintains the load voltage to within its desired range.

Conclusion

The EAC-10-102-D power line filter module is designed to provide effective protection from electrical noise in power distribution systems. It is a cost-effective and efficient way to protect circuits from electrical interference. The filter module can be easily installed with no special equipment needed and is designed to operate in temperatures between -20°C and 55°C. The EAC-10-102-D is capable of filtering out unwanted electrical noise while allowing useful signals to pass through and actively maintains the load voltage within its desired range.

The specific data is subject to PDF, and the above content is for reference