Allicdata Part #: | EAC-16-472-D-ND |
Manufacturer Part#: |
EAC-16-472-D |
Price: | $ 20.63 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 16A DIN |
More Detail: | N/A |
DataSheet: | EAC-16-472-D Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 18.74880 |
Series: | EAC |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 16A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules are widely used in various applications to reduce or eliminate interference from external sources. The EAC-16-472-D is one such product. It is specially designed to reduce harmonic current distortion and provide clean DC power directly to the load. This article will discuss the applications and working principles of the EAC-16-472-D.
The EAC-16-472-D is mostly used in high power, low voltage applications. It is also suitable for industrial motor control and stabilizing the output of inverters. It is often necessary in order to meet EMC requirements in applications that require high performance and environmental compliance.
The EAC-16-472-D is a dual-stage filter that consists of two parallel elements. The first stage is a low-pass filter that allows frequencies below the cutoff to pass through. The second is a high-pass filter that blocks frequencies higher than the cutoff. Together, these filters form a low EMI/RFI power line filter.
The EAC-16-472-D is able to reduce common mode and differential mode interference as well as harmonic distortion in AC power lines. This makes it suitable for motor control and other demanding applications that require high accuracy and interference protection. It works by providing a low signal to noise ratio and significantly reducing unwanted noise from the power supply.
The working principle of the EAC-16-472-D is relatively simple. The input power is separated into two signals, one passband and one stopband signal. The passband signal is further filtered and filtered again by an AC power filter. The filtered signal is then provided to the load. The stopband signal is discarded.
The EAC-16-472-D is a high-performance power line filter module that is well-suited for applications where power delivery needs to be clean and interference-free. It is a cost-effective solution that can provide reliable power to various applications, from industrial motor control to inverters.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT