Allicdata Part #: | EAC-16-681-D-ND |
Manufacturer Part#: |
EAC-16-681-D |
Price: | $ 20.63 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 16A DIN |
More Detail: | N/A |
DataSheet: | EAC-16-681-D Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 18.74880 |
Series: | EAC |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 16A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power line filter modules are often used to reduce the amount of noise and interference on a power line. The EAC-16-681-D is a type of power line filter module designed to reduce electrical noise on 3-16V DC power lines. The filter features a wide frequency operating range, low insertion and return loss, and high attenuation, allowing it to be used in a variety of applications.
The filter is an LC-type filter, which includes two components; an inductor, and a capacitor. The inductor and capacitor are connected in series, forming a simple LC circuit. This circuit is designed to suppress frequency components that are outside of the desired frequency range. The basic operating principle is that the inductance of the inductor and the capacitance of the capacitor forms a varying electrical impedance to certain frequency components, while allowing other frequency components to pass. The inductor and capacitor are designed to have specific impedance values at certain frequencies, resulting in attenuation or rejection of unwanted frequencies.
The EAC-16-681-D is a wideband low pass filter which has a cut-off frequency from 20 kHz to 200 MHz, depending on the input voltage. It is designed for use with 16V and below DC power lines, and has a maximum power rating of 10W. It offers high attenuation up to 120 dB, low insertion loss, and low return loss. These features make it well suited for applications where noise from unwanted signals must be reduced.
one example of a potential application for the EAC-16-681-D is in a power line communication (PLC) system. A PLC system includes both power line modems and other communications equipment connected to the power line. The power line modems transmit and receive data by modulating signals onto the power line. Noise on the power line can interfere with the transmitted data, reducing the signal quality and data rate. The EAC-16-681-D can be used to reduce this interference, allowing for a higher data rate and more reliable communication. The module is also suitable for other applications that require suppression of unwanted frequencies in a DC power line.
In summary, the EAC-16-681-D is a wide frequency range power line filter module designed for 16V and below DC power lines. It offers high attenuation, low insertion and return loss, making it suitable for applications where noise from unwanted signals must be reduced. Typical applications include power line communication systems, which require the suppression of unwanted frequencies in order to achieve a higher data rate and more reliable communication.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT