Allicdata Part #: | EAC-20-102-D-ND |
Manufacturer Part#: |
EAC-20-102-D |
Price: | $ 21.01 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 20A DIN |
More Detail: | N/A |
DataSheet: | EAC-20-102-D Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 19.10160 |
Series: | EAC |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 20A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The EAC-20-102-D is a filtering module that is part of a group of power line filter modules. These types of filter modules are designed to reduce electrical noise interference in power lines and in applications that draw current from such lines. In order to understand the working principle of the EAC-20-102-D, it is necessary to first look at the general operation of power line filters.
Power line filters are used to block or attenuate any unwanted electrical noise that may appear on the power line. This noise can come in many forms, including radio frequency noise, industrial equipment noise, and even natural sources of interference, such as lightning strikes. The power line filters act as a barrier between the noise source and the connected equipment, allowing the desired signal to reach the equipment while keeping out any potentially harmful noise. The EAC-20-102-D is a specialized type of power line filter, designed for a specific application.
The EAC-20-102-D draws its name from its components. The EAC stands for “Electric Power Noise Attenuators”, while the number “20-102-D” refers to its design parameters. This filter module consists of two filters, each consisting of two capacitors and two inductors. The inductors are designed to block signals at frequencies lower than the desired signal, while the capacitors are designed to block signals at frequencies higher than the desired signal. This combination of components is then connected to the power line, allowing any noise interference that may be present on the line to be filtered out, while still allowing the desired signal to be transmitted. The EAC-20-102-D is designed to work in a range of AC line voltages from 115 to 600 VAC, and handles current up to 15 A.
The EAC-20-102-D is designed primarily for use in telecommunications applications, which require very high levels of noise rejection while still providing an adequate signal level. Such applications may include DSL modems, VoIP phones, and other high-speed communication devices. The filter module is also used in industrial applications, such as motor speed controls, conveyor power supplies, and arc welding systems. Additionally, the EAC-20-102-D can be used in a variety of commercial power-line applications, such as audio amplifiers, power quality monitors, and lighting systems.
The EAC-20-102-D is an important part of the power line filter modules, as it provides a very effective way of reducing noise interference on power lines. By using two filters, the EAC-20-102-D is able to reject both high- and low-frequency interference, while still allowing the desired signal to pass. This combination of components allows the filter to block out a wide range of noise, making it highly suited to applications that demand a high level of signal integrity.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT