Allicdata Part #: | EAP-03-681-D-ND |
Manufacturer Part#: |
EAP-03-681-D |
Price: | $ 20.24 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 3A DIN |
More Detail: | N/A |
DataSheet: | EAP-03-681-D Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 18.39600 |
Series: | EAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 3A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The EAP-03-681-D power line filter modules are designed to protect electronic equipment from electromagnetic interference (EMI) and radio frequency interference (RFI). This type of filter module uses a combination of inductors, capacitors and ferrite core beads which work together to form an effective filter for power lines. The main components of the EAP-03-681-D filter module are a capacitance bleeder, a pair of inductors, a resistor and a ferrite core bead. This combination helps to reduce the noise on the power line and make it compliant with the accepted certification standards.
The capacitance bleeder is used to reduce the resonance on the power line. This reduces the amount of EMI and RFI that can be introduced into the power system. The inductors are used to decrease the impedance on the power line. This helps reduce the amount of EMI and RFI which can be introduced into the power system. The resistor helps stabilize the current on the power line. This prevents temporary over voltage or under voltage which can cause severe damage to electronic components.
The ferrite core bead is used to absorb any EMI or RFI on the power line. This helps reduce the amount of interference and helps reduce the possibility of damage to electronic components due to electromagnetic interference or radio frequency interference. The filter also helps reduce the amount of power wasted by the components.
The EAP-03-681-D power line filter modules are designed to be used in a variety of applications including telecommunications, medical equipment and consumer electronics. This type of filter is used to reduce electromagnetic interference and radio frequency interference from power lines. The filter has a very low insertion loss which helps to reduce the amount of distortion due to the filtering process. This makes it an ideal choice for applications which require a clean power source.
The EAP-03-681-D filter module is designed to provide protection from EMI and RFI in a wide range of frequencies. The module is also designed to provide a high level of protection from voltage surges and transients. The filter can also be used to filter out noise produced by other power lines in the system. This makes it an ideal choice for high powered systems where interference can be a problem.
The EAP-03-681-D filter module is a cost effective solution for providing protection to electronic equipment from EMI and RFI. It is easy to install and provides a reliable method for reducing EMI and RFI. This type of filter module also helps reduce the amount of power being wasted by providing clean power to electronic components.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT