Allicdata Part #: | 1776-2931-ND |
Manufacturer Part#: |
EAP-03-681 |
Price: | $ 17.12 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 3A CHAS |
More Detail: | N/A |
DataSheet: | EAP-03-681 Datasheet/PDF |
Quantity: | 2 |
1 +: | $ 15.56100 |
10 +: | $ 15.07720 |
25 +: | $ 14.59080 |
50 +: | $ 14.10440 |
100 +: | $ 13.61810 |
250 +: | $ 12.15900 |
500 +: | $ 11.91580 |
Series: | EAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 3A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The EAP-03-681 is a power line filter module used in many industrial and consumer applications. It is designed to help reduce unwanted electrical noise, interference, and unwanted signal propagation. Its design is simple, yet versatile, and it has a relatively low-cost.
The EAP-03-681 consists of three components: two capacitors and one inductor. The two capacitors are connected in series and act as two single-ended filters: a high-pass filter and a low-pass filter. The inductor helps to reduce the amount of noise generated within the system. The inductor acts like a transformer, filtering out any unwanted high-frequency noise. The combination of the two capacitors and the inductor form a three-pole filter with a -3 dB cutoff frequency of 681 Hz.
In operation, the EAP-03-681 acts as a high-pass filter for frequencies above 681 Hz and as a low-pass filter for frequencies below 681 Hz. This means that any signals with frequencies outside of the -3 dB cutoff frequency (above 681 Hz or below 681 Hz) will be filtered through the device.
The EAP-03-681 is typically used in applications where power line noise needs to be filtered out. For example, in audio/video systems, the EAP-03-681 can help reduce hum, buzzing, and interference. In data/communications systems, the EAP-03-681 can help reduce crosstalk and distortion. It can also be used to help reduce RF emissions and radio interference in industrial, scientific, medical, and commercial applications.
The EAP-03-681 is a relatively simple and cost-effective solution for reducing unwanted electrical noise, interference, and unwanted signal propagation. It is easy to install and requires minimal maintenance. With its -3 dB cutoff frequency of 681 Hz, it can effectively filter out frequencies outside of this range. For applications where power line noise needs to be reduced, the EAP-03-681 can provide an effective and cost-effective solution.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT