Allicdata Part #: | 1776-2105-ND |
Manufacturer Part#: |
EAP-06-101 |
Price: | $ 17.70 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 6A CHAS |
More Detail: | N/A |
DataSheet: | EAP-06-101 Datasheet/PDF |
Quantity: | 7 |
1 +: | $ 16.09020 |
10 +: | $ 15.58490 |
25 +: | $ 15.08220 |
50 +: | $ 14.57950 |
100 +: | $ 14.07670 |
250 +: | $ 12.56850 |
500 +: | $ 12.31710 |
Series: | EAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 6A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power line filter modules act as a protectant for electrical wiring from unexpected surges and other damaging effects arising from high-powered equipment and other external influences. EAP-06-101 is a type of power line filter module made by UcsST. It is designed to reduce the level of high-frequency noises on power lines and minimize the surge current of digital and analogue equipment. The module offers protection from electromagnetic interference (EMI) and has a maximum ripple current of 5A. Additionally, it is perfect for controlling the response time of power sources. The EAP-06-101 is the ideal filter module for industrial applications.
The working principle of the EAP-06-101 power line filter module is simple. The module consists of two primary components: an inductor coil and a dielectric material. The inductor coil provides a low impedance path for high-frequency signals, while the dielectric material attenuates high-frequency signals travelling along the power lines. This attenuation occurs by passing the signal through the dielectric material which creates a wide area of capacitance. The inductor coil and dielectric material form a series-parallel circuit, allowing low-frequency and ripple currents to pass. The inductor coil reduces voltage changes by shunting high-frequency signals, while the dielectric material attenuates higher frequencies.
Additionally, the EAP-06-101 is designed with a low-pass filter which allows only high-frequency signals below a set threshold to pass. The low-pass filter is made up of ferrite beads. The ferrite beads create a magnetic field around the power line, allowing high-frequency signals to be rejected. These ferrite beads also reduce the risk of power line surge or ground loop interference. Ultimately, the EAP-06-101 filter module reduces the presence of high-frequency noise significantly.
The EAP-06-101 power line filter module is a highly efficient filter, providing reliable protection within a wide range of operating conditions. It has a wide operating temperature range, from -40°C to +125°C, and has a long life span. The module also meets EFT, EFC and RF regulations from IEC, CISPR and FCC. This ensures that the EAP-06-101 power line filter modules provide superior EMI protection.
Overall, the EAP-06-101 Filter Module is the perfect solution for those in need of a low-cost, easy to install power line filter. It is ideal for industrial applications, providing reliable protection and fast response time. It is an efficient filter module that provides effective protection against high-frequency noises and surges, ultimately guaranteeing superior EMI protection.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT