EAP-10-221-D

Series:	EAP
Part Status:	Active
Filter Type:	Single Phase
Configuration:	Single Stage
Voltage - Rated DC:	250V
Voltage - Rated AC:	250V
Voltage - Rated AC (Phase to Ground/Neutral):	250V
Current:	10A
Frequency - Operating:	--
Applications:	General Purpose
Approvals:	cURus, VDE
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	DIN Rail
Termination Style:	Terminal Block
Inductance:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules: EAP-10-221-D application field and working principle

Power line filter modules are an important type of AC power line filters with a wide range of applications. The EAP-10-221-D filter module is among the top of the line of these filters. It has a high current carrying capacity, high voltage insulation capability, and a high power density. The purpose of this filter module is to reduce the potential for problems due to interference from external sources. The EAP-10-221-D filter module is appropriate for a variety of applications, including motor drives, data communication systems, robotics, and test and measuring equipments. It also works to reduce noise for products with electric, photoelectric, and other sensitivities. The EAP-10-221-D filter module utilizes an inductor as the basic building block of its LC circuit. The inductor converts alternating current (AC) into useful energy and provides additional protection for the module. The three capacitors of the LC circuit have different values, each with their own purpose in noise reduction. The first capacitor operates to block interference from the power grid and the second capacitor operates to reduce high frequency noise from the motor drive. The third capacitor is designed to prevent high frequency angle current, which is a cause of interference in data communication systems. The use of three capacitors instead of just one helps to minimize noise and further protect the filter module. The EAP-10-221-D filter module is made up of a series of three inductors, two capacitors and one choke coil. This configuration provides it with superior performance in both high and low frequency noise reduction. Additionally, the use of a choke coil means that its components are completely insulated from a potential short circuit, greatly reducing potential damage to sensitive equipment.The filter module has been designed with a special three-dimensional coil form to maximize its performance. This coil form allows the inductors to be wound in a flat cylindrical shape, and the coils to be placed at various angles within the module. This design ensures that the largest possible surface area of the inductors is exposed to the electric field, thus improving the filter’s performance. The EAP-10-221-D filter module is capable of carrying currents up to 200A with a voltage insulation rating of up to 10kV. Its power density is also excellent, with a power dissipation of between 5W and 25W, depending on the operating conditions. In conclusion, the EAP-10-221-D filter module is an excellent choice for applications requiring a high current carrying capacity, high voltage insulation capability, and a high power density. Its three-dimensional coil form and three-capacitor configuration make it an effective solution for noise reduction in a variety of applications.

The specific data is subject to PDF, and the above content is for reference