Allicdata Part #: | 1776-2108-ND |
Manufacturer Part#: |
EAP-16-102 |
Price: | $ 18.49 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 16A CHAS |
More Detail: | N/A |
DataSheet: | EAP-16-102 Datasheet/PDF |
Quantity: | 6 |
1 +: | $ 16.80210 |
10 +: | $ 16.27860 |
25 +: | $ 15.75330 |
50 +: | $ 15.22810 |
100 +: | $ 14.70290 |
250 +: | $ 13.12760 |
Series: | EAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 16A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The EAP-16-102 power line filter module is a commonly used industrial grade power line filter module, which is mainly used for power line filtering applications. This module is rated for 16A continuous load and can handle up to 32A of surge current. The EAP-16-102 filter module is made of four main components, the line filter, capacitor, inductor, and heat sink.
The line filter is used to remove high frequency noise from the power line. The filter consists of two coils of copper wire, a common mode choke and ceramic capacitors. The common mode choke isolates the power line from the high frequency noise and the capacitors act as an AC bypass for the noise to bypass the filter. The two coils and capacitor are housed inside a metal can which shields the capacitor and coils from EMI and RFI.
The inductor is also used for power line filtering applications. The inductor is made of copper and is designed to absorb higher frequency noise from the power line. The inductor is connected to the line filter and the capacitor in order to create a low pass filter which filters out higher frequency noise.
The capacitor is used to provide a DC offset for the power line filter module. The capacitor is connected to the line filter and inductor in order to create a low pass filter which can filter out noise from both the AC and DC power lines. The capacitor also acts as a buffer, allowing the module to operate at a higher input voltage.
The EAP-16-102 power line filter module also features a heat sink which is used to dissipate heat from the components of the filter. The heat sink also helps to provide maximum performance from the module. The heat sink is designed to allow air to flow freely around the components, allowing them to operate at maximum efficiency.
The EAP-16-102 power line filter module is designed to provide superior power line filtering, and to protect circuits from the effects of power line noise and interference. The filter module is designed to offer high performance and protection in a wide range of industrial applications. The module can withstand high current and voltage levels and is designed to operate in extreme environmental conditions. The module is also designed to be very easy to install and maintain.
In conclusion, the EAP-16-102 power line filter module is a popular industrial grade power line filter module which is used to provide superior power line filtering and protection in a wide range of applications. The module is rated for up to 16A continuous load and 32A surge current, and is designed to operate in extreme environmental conditions. The module is made of four main components: line filter, capacitor, inductor and heat sink, and is designed to be easy to install and maintain.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT