EAP-16-221

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules (PFLM) are designed to reduce electromagnetic interference (EMI) in electrical systems. The EAP-16-221 is a typical example of such modules, which is a basic electrical filter module used in power line applications.

The EAP-16-221 module is designed to filter out high frequency noise from a variety of sources in order to provide a cleaner power source for critical equipment and applications. The module consists of two power lines, a common ground line, a bypass capacitor and a fuse. It has a rated voltage of 16 volts and peak voltage of 18.2 volts. The module is very efficient and can be used in a variety of power line applications.

The working principle of the EAP-16-221 module is based on the concept of impedance matching. This means that the filter module impedes the passage of high-frequency noise while allowing low-frequency signals to pass through. The impedance is determined by the characteristics of the components of the module and the design of the circuit. The design of the circuit is dependent on the requirements of the application in which the module is used.

The EAP-16-221 is capable of blocking frequencies from 0.5 MHz to 500 MHz. It has a low pass filter and a high pass filter which are designed to limit the frequencies which can pass through the module by decreasing the electrical noise. The high pass filter also provides some additional protection to the module and the system by preventing low frequency signals from entering the power line.

The filter module also has an integrated temperature sensor which is used to monitor the temperature of the system. The temperature sensor is designed to provide an indication of when the filter should be replaced due to excessive heat. The fuse of the module is designed to trip if the temperature of the system gets too high and disrupts the system.

The EAP-16-221 module is effective in reducing the amount of EMI which can be found in power lines. It is ideal for applications in which high frequency noise needs to be filtered out. The module is designed to provide the necessary protection from high frequencies while allowing low frequencies to pass through. It is easy to install and requires minimal maintenance.

The specific data is subject to PDF, and the above content is for reference