Allicdata Part #: | 1776-2950-ND |
Manufacturer Part#: |
EAP-16-222 |
Price: | $ 18.49 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 16A CHAS |
More Detail: | N/A |
DataSheet: | EAP-16-222 Datasheet/PDF |
Quantity: | 2 |
1 +: | $ 16.80210 |
10 +: | $ 16.27860 |
25 +: | $ 15.75330 |
50 +: | $ 15.22810 |
100 +: | $ 14.70290 |
250 +: | $ 13.12760 |
Series: | EAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 16A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules are a type of filter designed to reduce disturbance from being carried on power lines by controlling the frequency and waveform of the electric current. The main purpose of these filters is to protect sensitive electrical and electronic equipment from the interference caused by sound or interference radiation. A typical module used in these filters is the EAP-16-222.
The EAP-16-222 is a four-channel power line filter module designed for filtering frequencies up to 200kHz. It consists of four universal-input channels, which allow the device to replace up to four separate filters. Each channel is equipped with an LF capacitor and an RF toroidal inductor, and has a physical connector, allowing it to be easily connected to an external device. The module also has an on-board power regulator, allowing it to operate at extremely low power levels while still providing good filtering performance. Internal temperature sensors provide power monitoring and protection.
The EAP-16-222’s working principle is based on the principle of electromagnetic coupling. This means that when the device is connected to the power line, the filter acts as a barrier between the RF frequencies and the power line, so that the power line can pass to the sensitive equipment without interference. To achieve this, the filter has two components; the inductor and the capacitor. The inductor intercepts the high-frequency electric current, and the capacitor prevents this current from travelling any further. This limits the RF frequency to the desired level and also converts the current to a low impedance waveform.
The EAP-16-222\'s filtering capabilities are further enhanced by its four-channel design. The four channels enable the sequence of the inductor and capacitor to be specific to the frequency of the signals that need to be filtered, thus providing a much higher level of filtering efficiency. Additionally, the module’s design ensures that the filter does not act as a load on the power line, as the power drawn to operate the filter is low. This means that the filter will not affect the power line’s performance.
The EAP-16-222 power line filter module is a very effective tool for reducing interference and improving the performance of sensitive electronic equipment. Its modular design makes it easy to install and convenient to replace. The four-channel filter design provides excellent filtering performance and the on-board regulator provides power monitoring and protection. The module is also cost-effective, making it a great choice for businesses or individuals that need to reduce interference from power-lines.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT