EAP-20-000-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules are becoming increasingly necessary in order to prevent EMI, RFI, and others from disrupting sensitive equipment. The EAP-20-000-D application field and working principle are especially important for understanding and selecting the proper solution. This article will provide an in-depth glimpse of the various situations in which this module is applicable to and the underlying principles that make it a useful tool for mitigating potential damage to sensitive equipment.

At the core of the EAP-20-000-D application field is the ability to dampen any untoward frequencies that could cause disruption to whatever is receiving the signal. In a typical power line filter module, the module introduces two capacitors in series, as well as a series of inductors in parallel. This combination, in turn, creates an intentionally formed low-pass filter that can block any frequencies above the cutoff frequency from entering the system. The default cutoff frequency for the EAP-20-000-D is approximately 79.6 kHz and can be adjusted for specific applications.

The inductors used in the module work by providing a low impedance for any frequencies that are below the cutoff point. This in turn blocks any potentially disruptive frequencies from being transmitted any further, thus maintaining the integrity of the power line filter module. Conversely, any frequencies that pass the cutoff frequency are blocked as they reach an inductive impedance within the power line filter module.

However, the working principle of the EAP-20-000-D module is not just limited to the ability to block unwanted frequencies. The module also functions as a low-pass filter and can reduce any high-frequency surge currents that may be transmitted through power lines. This helps protect any connected devices from experiencing potentially damaging power spikes that can occur when high-frequency inputs, such as lightning strikes and other electromagnetic interference, enter the power line.

In addition to the standard EAP-20-000-D module, there are several other options available for those who require additional protection and control. For instance, an EAP-20-000-D with a high-frequency bypass switch can be used to allow higher frequency, short duration transients to pass through the filter without any attenuation or distortion. In addition, the module can be fitted with a surge protector to further increase the protection and durability of the device.

Finally, the EAP-20-000-D also features an external timing control switch that can be used to adjust the duration of the filtering. This can be used for applications where higher frequency noise might be present for a longer period of time, and there is a need to reduce the filter\'s noise suppression level in such cases. This can also be used to prevent any long-term filtering effects that may cause undesired attenuation.

The EAP-20-000-D application field and working principle show that this power line filter module is an invaluable tool for preventing any unwanted interference from entering the system and causing harm to sensitive equipment. By offering adjustable cutoff frequency, surge protection, and external timing control, this module can offer reliable protection in multiple scenarios and help prolong the life of expensive and sensitive equipment.

The specific data is subject to PDF, and the above content is for reference