Allicdata Part #: | EAP-30-222-D-ND |
Manufacturer Part#: |
EAP-30-222-D |
Price: | $ 22.77 |
Product Category: | Filters |
Manufacturer: | Cosel USA, Inc. |
Short Description: | LINE FILTER 250VDC/VAC 30A DIN |
More Detail: | N/A |
DataSheet: | EAP-30-222-D Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 20.69550 |
Series: | EAP |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | 250V |
Voltage - Rated AC: | 250V |
Voltage - Rated AC (Phase to Ground/Neutral): | 250V |
Current: | 30A |
Frequency - Operating: | -- |
Applications: | General Purpose |
Approvals: | cURus, VDE |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | DIN Rail |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power line filter modules, such as the EAP-30-222-D, are often used in industrial environments for effective power supply noise and interference reduction. By using these filter modules, users can reduce line emissions and avoid electromagnetic interference (EMI) from nearby equipment.The EAP-30-222-D is a three-phase filter module with an input power rating of 500A, operating at a voltage of between 150V and 480V. The filter module is designed with a dual-pole configuration, offering two separate outputs for controlling the current flowing along the lines. The filter module also includes an integrated neutral grounding resistorsystem, which helps to limit the amount of current passing through the neutral line and thus reduce the risk of short-circuit faults. The filter module also has a built-in active bypass relay that will automatically bypass the filter during overload or short-circuit conditions.The EAP-30-222-D filter module is designed to reduce the effect of common-mode noise on sensitive electronic circuits. The filter module effectively isolates the input and output circuits, creating a two-layer filter structure. The first layer consists of Y-type capacitors, which reduce the level of common-mode voltage noise. The second layer is a differential-mode PI filter, which is used to reduce the differential voltage noise. The two layers are also connected to a low-pass filter, which further reduces the noise levels. The filter module also features a built-in surge suppressor to protect against transients and intermittent disturbances on the power line.The working principle of the EAP-30-222-D filter module is simple. The filter module is connected to the power lines and provides an effective way of suppressing noise and interference on the power source. The filter module works by attenuating the higher frequency components of the power signal, allowing the lower frequency components to pass through. The differential mode filter allows only the desired low-frequency signals to pass through. The common-mode filter blocks the noise and interference from the source. The high-pass filter then filters out any remaining noise and interference, leaving only the desired signal.The EAP-30-222-D filter module is an ideal solution for applications where high accuracy electrical systems are needed, such as motor control or industrial production lines. The filter module is also suitable for reducing EMI on digital electronic devices and other sensitive equipment. The filter module is capable of providing highly accurate control of power supply, ensuring the reliability and performance of electrical devices.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT