ECH-U1H123JX5 Capacitors

Operating Temperature:	-55°C ~ 125°C
Features:	--
Ratings:	--
Applications:	General Purpose
Lead Spacing:	--
Termination:	Solder Pads
Height - Seated (Max):	0.051" (1.30mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	1210 (3225 Metric)
Mounting Type:	Surface Mount
Series:	ECH-U(X)
Dielectric Material:	Polyphenylene Sulfide (PPS), Metallized - Stacked
Voltage Rating - DC:	50V
Voltage Rating - AC:	--
Tolerance:	±5%
Capacitance:	0.012µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film Capacitors Film capacitors are electronic components that are used to store charge and provide electrical energy. They are made of two metal plates or two metal foils separated by a thin dielectric film. This dielectric film is typically made of polypropylene, polyester, polystyrene, polycarbonate, PTFE, or ceramic. The metal plates or foils are usually connected with electrical leads, which are then connected to a circuit. The ECH-U1H123JX5 is a miniature, radial lead polypropylene film capacitor from Nippon Chemicon Corporation. It features a capacitance range of 0.022µF to 0.1µF, with a voltage rating of 50 VDC. This capacitor is most commonly used for general-purpose applications, such as decoupling, filtering, ringing suppression, and timing/delay circuits.The working principle of a film capacitor is similar to other types of capacitor. When a voltage is applied to the two electrodes of a film capacitor, electrons will be transferred from one electrode to the other, thus creating a capacitance that can store charge. When the capacitor is “charged”, the voltage across the two electrodes will remain relatively steady, as no current will flow until the capacitor is “discharged”. The ECH-U1H123JX5 Film Capacitor is a great choice for different electronic circuits and devices, such as decoupling in power supplies, filling in transmission lines and building filters. It works well as by-pass and blocking capacitors in frequency-sensitive circuits. It also works well as short-duration power reservoirs for time and voltage sensitive applications. This capacitor is also a great choice for frequency-sensitive circuit and oscillator circuits.This capacitor is also used for general-purpose high frequency noise filtering, where their extremely low ESR (equivalent series resistance) allows high-frequency signals to pass, while blocking the low-frequency signals. The ECH-U1H123JX5 has a very low dielectric absorption ratio, which makes it a better choice than other film capacitors for noise filtering. This capacitor is also most commonly used in these applications due to its “no-solder” technology, which means that it requires no soldering and can be easily plugged into a circuit board.In conclusion, the ECH-U1H123JX5 Film Capacitor from Nippon Chemicon Corporation is a great choice for a wide range of general-purpose applications, such as decoupling, filtering, ringing suppression, and timing/delay circuits. Its small size, low ESR, and no-solder technology make it a great choice for all types of noise reduction, high frequency, and other frequency- sensitive circuit and oscillator circuits.

The specific data is subject to PDF, and the above content is for reference