ECL10US15-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ECL10US15-T is a name for a type of AC/DC Converter. This type of converter is a reliable power source that has been commonly used in residential, commercial and industrial applications. It converts the standard AC voltage input into a safer and stable DC voltage, depending on its specific voltage rating. It takes the AC power from the wall outlet, transmits it through its internal circuit and stabilizes it to output a steady DC voltage that is suited for a wide range of equipment and appliances.

The ECL10US15-T AC/DC Converter is designed with a built-in thermal protection, overload protection and short circuit protection. This ensures maximum safety and operation efficiency of the converter. It is also designed with a high power factor of greater than 0.90 and a high efficiency of up to 85%, depending on the operating temperature and input voltage. With its wide operating temperature range of -20℃ to 55℃, it can function effectively in both cold and hot environments.

The ECL10US15-T AC/DC Converter is designed with an isolated single output with a rated voltage of 15V. It has a maximum power rating of 25W and is suitable for applications requiring a maximum of 100 mA current. When connected to an external load the ECL10US15-T converter will operate in continuous, pulse-by-pulse or burst mode. It also exhibits a low leakage current of less than 0.5mA.

The working principle of the ECL10US15-T AC/DC Converter is based on a modulation technique that results in a high efficiency and low ripple. The converter consists of a switching power semiconductor, and a passive filter network consisting of a transformer, inductor, capacitor and a diode. The power semiconductor acts as an electronic switch that turns on and off at a very high frequency, allowing the voltage converter to switch from AC to DC. It also allows it to maintain a relatively constant output in spite of large variations in the input voltage.

When an AC supply is applied, the switching power semiconductor turns on and off at a very high frequency, resulting in a sinusoidal signal at the output. This output is then filtered by the inductor, capacitor and diode to provide a DC signal. The output voltage of the ECL10US15-T AC/DC Converter is directly proportional to the input voltage, but the output current is limited by its maximum rated current.

The ECL10US15-T AC/DC Converter is reliable, efficient and easy to use. It is suitable for use in a variety of residential, commercial and industrial applications, as it ensures a safe and stable output in a wide range of operating temperatures. With its built-in thermal protection, short circuit protection and overload protection, it is well-suited for powering a variety of electrical equipment and appliances.

The specific data is subject to PDF, and the above content is for reference