ECQ-E4393JF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Capacitors are widely used in film production as they can store energy and release it in pulse form. The ECQ-E4393JF capacitor is an example of a film capacitor, which is useful for reverse polarity and ESD protection, as well as smoothing power supply current and EMC applications.

Capacitors are similar to batteries in the sense that they can store energy and provide an electrical charge over a certain period of time. However, they differ in the way energy is stored and released. A film capacitor uses an electrical film – usually Mylar or polycarbonate – to store energy. This is accomplished by separating two conductive plates from each other with the film as a dielectric. The positive and negative charges of the plates will create an electric field and allow current to flow. When the current is removed, the electric field will remain, and the capacitor will continue to store energy.

Within the ECQ-E4393JF, two conductive plates are separated from each other using thin polyester film. The maximum voltage the device can handle is typically between 275 and 300 VDC, which is suitable for reverse polarity protection in many applications. Additionally, the device will also act as an ESD protection component due to the presence of the thin polyester film, which can absorb large amounts of energy.

The ECQ-E4393JF can also be used as a power supply voltage smoothing component. In this application, the capacitor acts to reduce the noise present in the voltage supply. This can be achieved by connecting the capacitor in parallel with the power supply. This arrangement effectively acts as a low pass filter, allowing lower frequency signals to pass through while blocking the higher frequency signals that would otherwise cause noise in the voltage supply.

The ECQ-E4393JF can also be used in EMC applications. By connecting the capacitor parallel with a component, it creates a two-terminal low pass filter. This reduces the amount of high frequency noise present in the component, thus improving the EMC performance of the system.

In summary, the ECQ-E4393JF is a film capacitor with a maximum voltage rating of 300 VDC. It is suitable for reverse polarity and ESD protection, voltage smoothing, and EMC applications. The capacitor works by using two conductive plates separated by a thin polyester film as a dielectric, thus allowing it to store and release energy in a controlled manner.

The specific data is subject to PDF, and the above content is for reference