ECQ-V1J273JMW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors, also known as film dielectric capacitors, are a type of capacitor built with plastic film as the dielectric. Its model ECQ-V1J273JMW is a film capacitor with temperature range from 55 to +105 degree Celsius. In addition, it has 6.3mm lead spacing, delivers an operating temperature of -40 to +85 Celsius, 105 degree Celsius degree rated capacitance, 100 V voltage rating, 200 % voltage proof, 0.25 uF capacitance and 0.67 Ohm impedance.

The working principle of film capacitors is based on the concept of electrical energy storage. When an electric field is applied across the two conducting plates of a capacitor, the electric field creates an electrical charge stored in the form of an electric field on the dielectric medium. This is due to the dielectric medium\'s ability to hold a charge and not let it escape. The higher the dielectric constant of the medium, the higher the capacitance of the component. In a film capacitor, the dielectric medium is usually a plastic film.

The dielectric material most commonly used in film capacitors is polyester (PET), polypropylene (PP), and polycarbonate (PC). Each type of film has distinct characteristics and applications. Polypropylene is good for capacitors with high humidity, while polyethylene naphthalate (PEN) films are used in applications requiring frequencies greater than 1 MHz. Film capacitors are usually polarized and have the property of holding a charge, making them very useful in AC applications and other areas where biased operation is required.

In an application consisting of an alternating current that requires energy storage, a film capacitor can be used. When a current is applied to the capacitor, it stores the electrical energy by creating an electric field on the dielectric material. When the current flow is reversed, the capacitor releases the stored energy. This process continues as long as the current is alternating, making the film capacitor a very effective energy storage device.

Film capacitors are also used in many other electrical applications, including smoothing high-frequency signals, decoupling noise at the output of amplifiers, and voltage regulation. They are also used in the powering of data connections and in the protection of electrical consumers. In addition, they are used for DC-DC converters, voltage multipliers, and protection of surge voltages. All the above applications require the use of capacitors with a high dielectric strength, which is why film capacitors, with their high dielectric constant, are such a great choice.

Film capacitors can also be used in medical electronics, specifically for defibrillation applications. Here, a high capacitance value is essential to obtain the desired voltage across the patient’s chest wall. The combination of low leakage current and high capacitance make film capacitors the best choice for defibrillation medical applications. Furthermore, because of the high insulation resistance produced by these capacitors, they are also used in medical electronics where high insulation voltage is required.

In conclusion, ECQ-V1J273JMW, a film capacitor model, deliver an operating temperature range from -40 to +85 Celsius, 105 degree Celsius degree rated capacitance, 100 V voltage rating, 200 % voltage proof, 0.25 uF capacitance and 0.67 Ohm impedance. In addition, its working principle is based on the concept of electrical energy storage by establishing an electric field on the dielectric material. Film capacitors are ideal for AC applications as they can store and release electrical energy when current flows. They are also considered ideal for medical electronics and defibrillation applications due to their high capacitance values and low leakage current.

The specific data is subject to PDF, and the above content is for reference