Allicdata Part #: | XC1575-ND |
Manufacturer Part#: |
ECS-110.5-20-4VX |
Price: | $ 1.20 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | CRYSTAL 11.0592MHZ 20PF T/H |
More Detail: | 11.0592MHz ±30ppm Crystal 20pF 60 Ohms HC-49/US |
DataSheet: | ECS-110.5-20-4VX Datasheet/PDF |
Quantity: | 925 |
1 +: | $ 1.09620 |
10 +: | $ 1.04958 |
50 +: | $ 1.02539 |
100 +: | $ 0.87885 |
500 +: | $ 0.85444 |
Series: | HC-49USSX |
Packaging: | Bulk |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 11.0592MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 20pF |
ESR (Equivalent Series Resistance): | 60 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -10°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-49/US |
Size / Dimension: | 0.447" L x 0.197" W (11.35mm x 5.00mm) |
Height - Seated (Max): | 0.083" (2.10mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals have long been used in a wide range of applications, including timing components in clocks and watches, frequency control modules, filters and oscillators. ECSC-110.5-20-4VX is a piezoelectric crystal resonator with a frequency of 110.5 kHz and a temperature operating range of -20 to +80°C.
Applications of ECSC-110.5-20-4VX crystal are primarily in consumer electronics, communications, automotive, and industrial products including electronic equipment for application in the Internet of Things. It can be used as an MRAM memory cell for embedded memory systems, as an oscillator in electronic watches, as a wireless communication device, as an RF timing device, as an audio controller for consumer electronics, and as a frequency-control device or timer for automotive or industrial control systems.
In addition to the frequency and temperature stability that characterise crystals, the ECSC-110.5-20-4VX offers a high drive capability and a low voltage operation that offers potential savings in power consumption. The device features a high Q factor of 140, which is four times higher than the standard quartz crystal that has a Q factor of 35. The low noise figure, high stability of oscillation frequency, and excellent vibrating properties, along with its low ESR, make this crystal an ideal choice for a wide range of applications.
The ECSC-110.5-20-4VX works by converting mechanical energy into electrical energy through piezoelectric effect. When an alternating electric field is applied to the crystal, it alternately expands and contracts, producing mechanical oscillations of a specific frequency depending on the dimensions of the crystal. The crystal is then amplified and further processed.
The device is therefore ideally suited for applications where high-frequency stability and accuracy are required, and which need to operate at low voltage levels in order to reduce power consumption. The device is also suitable for systems that require multiple oscillator crystals with the same frequency, and for applications requiring multiple tuning techniques for improved performance.
The ECSC-110.5-20-4VX is an ideal crystal for a wide range of applications and is a reliable and cost-effective option for accurate and precise timing and frequency control.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...