Allicdata Part #: | XC1747-ND |
Manufacturer Part#: |
ECS-147.4-18-4XEN |
Price: | $ 0.46 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | CRYSTAL 14.7456MHZ 18PF T/H |
More Detail: | 14.7456MHz ±30ppm Crystal 18pF 40 Ohms HC-49/US |
DataSheet: | ECS-147.4-18-4XEN Datasheet/PDF |
Quantity: | 28 |
1 +: | $ 0.41580 |
10 +: | $ 0.34650 |
50 +: | $ 0.31185 |
100 +: | $ 0.27720 |
500 +: | $ 0.26334 |
1000 +: | $ 0.22176 |
2500 +: | $ 0.20790 |
5000 +: | $ 0.20097 |
10000 +: | $ 0.19404 |
Series: | HC-49USX |
Packaging: | Bulk |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 14.7456MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 40 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 85°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-49/US |
Size / Dimension: | 0.447" L x 0.183" W (11.35mm x 4.65mm) |
Height - Seated (Max): | 0.138" (3.50mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals
Crystals are an integral part of electronic circuitry. They are used to control the frequency of oscillators and to ensure signal accuracy, clarity, and purity. In order to achieve this, they must be precisely cut and fitted to the specific application.
The ECS-147.4-18-4XEN is a quartz-based crystal oscillator specifically designed for applications involving high frequency and fast switching speeds. It is made of quartz crystal, which has been cut to simulate an oscillator. It has a central frequency of 147.4 MHz, 50KHz good short-term and long-term stability, and a low power consumption of 4 mA.
The ECS-147.4-18-4XEN has a wide range of uses. It can be used in industrial applications such as motor speed control and precision applications such as timing and pulse-width modulation. It can also be used in communication and navigation, data acquisition and transmission, and timing systems.
The ECS-147.4-18-4XEN works by vibrating the quartz crystal. This vibrating frequency is determined by the cut of the quartz, and is known as the central frequency. The oscillator then amplifies the signal and produces a voltage at the output that is the same frequency as the input. This frequency is then typically regulated to the desired frequency for the specific application.
The quartz crystal is made of piezoelectric material, which means that when it vibrates, it produces electrical charges that act as an oscillator to regulate the output frequency. This frequency is determined by the cut of the quartz, and the specific application will determine the type of cut that should be used.
The ECS-147.4-18-4XEN is designed to provide stable, repeatable performance and can be used in a variety of applications, ranging from industrial and precision to communication and navigation. Its low power consumption, high frequency and fast switching speeds make it an ideal choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...