Allicdata Part #: | X438-ND |
Manufacturer Part#: |
ECS-200-S-4 |
Price: | $ 0.48 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | CRYSTAL 20.0000MHZ SERIES T/H |
More Detail: | 20MHz ±30ppm Crystal Series 30 Ohms HC-49/US |
DataSheet: | ECS-200-S-4 Datasheet/PDF |
Quantity: | 887 |
1 +: | $ 0.43470 |
10 +: | $ 0.36225 |
50 +: | $ 0.32609 |
100 +: | $ 0.28980 |
500 +: | $ 0.27531 |
1000 +: | $ 0.23184 |
2500 +: | $ 0.21735 |
5000 +: | $ 0.21011 |
10000 +: | $ 0.20286 |
Series: | HC-49US |
Packaging: | Bulk |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 20MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | Series |
ESR (Equivalent Series Resistance): | 30 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -10°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-49/US |
Size / Dimension: | 0.447" L x 0.183" W (11.35mm x 4.65mm) |
Height - Seated (Max): | 0.138" (3.50mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
ECS-200-S-4 Application Field and Working Principle
ECS-200-S-4, also known as a quartz crystal oscillator, is a device used in electronic circuits to generate a stable frequency and provide a consistent flow of synchronized signals. Quartz crystals are used in many types of electronic applications, ranging from radio broadcast equipment to digital clocks to watches. As such, it is one of the most widely used components in the world of electronics.
Quartz crystals are composed of a piezoelectric material and come in several sizes and shapes, depending on their use and application. They are commonly used in oscillators and frequency circuits, where they generate a stable and reliable frequency signal. The most common application is in the design of oscillators, which are circuits that can be used to produce a sine wave or other types of periodic waveform. Oscillators are used in a number of different applications, including radio and television broadcast, audio and video processing, and even cellular phones.
The ECS-200-S-4 is one type of quartz crystal oscillator and is typically used to control and maintain the frequency of radio signals. It is most commonly found in radio broadcast equipment and acts as a clock for the radio station\'s transmission system. The oscillator works by converting electrical energy into mechanical vibrations, which are then converted back into an electrical output. This output is then used to maintain a continuous, stable frequency.
The operating principles of the ECS-200-S-4 are relatively simple and straightforward. The quartz crystal is connected to a resistor and an AC power source, usually an AC adapter or battery. When these components are arranged in the proper configuration, they create an oscillating circuit, which creates a low-level AC signal at a specific frequency.
Once the oscillator is constructed, the frequency of the generated signal can be adjusted by changing the resistance of the resistor. The resistance of this resistor determines how much current is flowing through the quartz crystal, and thus how the frequency of the generated signal changes. Another way to adjust the frequency of the oscillator is by adjusting the voltage applied to the crystal. This is done using a potentiometer.
The ECS-200-S-4 is a highly reliable device and is used in a variety of applications. It is commonly used in radio transmitters to ensure that the transmission frequency remains constant. In addition, some applications may require different frequencies of operation, in which case the oscillator can be tuned to the required frequency.
In summary, the ECS-200-S-4 is a quartz crystal oscillator and is used in a variety of electronic applications. Its working principle is relatively simple, as it works by converting electrical energy into mechanical vibrations, which are then converted back into an electrical output. The output can then be used to control the frequency of a signal. The oscillator can be tuned to different frequencies, making it suitable for different types of applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...