ECS-2100A-162.5

Frequency Stability:	±100ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.213" (5.40mm)
Size / Dimension:	0.520" L x 0.520" W (13.20mm x 13.20mm)
Package / Case:	8-DIP, 4 Leads (Half Size, Metal Can)
Mounting Type:	Through Hole
Ratings:	--
Current - Supply (Max):	25mA
Operating Temperature:	0°C ~ 70°C
Series:	ECS-2100
Voltage - Supply:	5V
Output:	HCMOS, TTL
Function:	--
Frequency:	16.257MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are hardware components used to generate periodic or repetitive signals. These signals can range from lower frequency to higher microwave frequency. An example of an oscillator is the ECS-2100A-162.5. The ECS-2100A-162.5 oscillator is used in applications such as radar or certain electronic warfare scenarios. It also has multiple uses in general communications system applications. The ECS-2100A-162.5 consists of two components—a voltage-controlled oscillator (VCO) and a frequency synthesizer. The VCO generates an output signal over a wide range of frequencies and is used to create the output frequency of the oscillator. The frequency synthesizer then tunes the output frequency of the VCO to the exact desired frequency. The ECS-2100A-162.5 is designed for operation over a wide range of frequencies. The VCO can generate an output signal from 1.5 GHz to 7.5 GHz and the frequency synthesizer can tune the output signal from 1MHz to 150 MHz. This makes the ECS-2100A-162.5 a very versatile oscillator for many applications. In order to better understand the application field and working principle of the ECS-2100A-162.5 it is important to understand some of the basic principles of oscillators. Oscillators generate electrical signals of specific frequency. Oscillators consist of an amplifier, a filter, a wave shape generator and control circuit. The amplifier is an amplifier that is used to amplify the electrical signal and is usually a voltage-controlled amplifier (VCA). The filter is used to select the frequency range of the signal and is usually a low-pass filter (LPF). The wave shape generator is used to create the actual wave shape of the signal and can be either a function generator or a lookup table. Finally, the control circuit is used to adjust the amplitude, frequency and phase of the signal. The ECS-2100A-162.5 oscillator is an example of a voltage-controlled oscillator (VCO). The voltage-controlled oscillator is a type of oscillator which is controlled by a varying voltage. The frequency of the output signal of the VCO can be changed by varying the voltage applied to the input port. The ECS-2100A-162.5 oscillator consists of an amplifier, a filter, a lookup table and a phase-lock loop (PLL) circuit. The amplifier is used to amplify the incoming signal and the filter is used to select the frequency range of the signal. The lookup table is then used to create the output wave shape and the PLL circuit is used to phase-lock the output frequency to the incoming signal. The ECS-2100A-162.5 oscillator is used in a variety of applications such as radar and certain electronic warfare scenarios. It is also used in general communications systems. It is designed to operate over a range of frequencies from 1.5 GHz to 7.5 GHz making it suitable for a wide range of applications. Furthermore, the frequency synthesizer allows for the precise tuning of the output frequency from 1MHz to 150MHz. In conclusion, the ECS-2100A-162.5 oscillator is a voltage-controlled oscillator that is designed for a wide variety of applications. It consists of an amplifier, a filter, a wave shape generator and a phase-lock loop circuit. The VCO can generate an output signal from 1.5 GHz to 7.5 GHz and the frequency synthesizer can tune the output signal from 1MHz to 150 MHz. This makes the ECS-2100A-162.5 a very versatile oscillator for many applications.

The specific data is subject to PDF, and the above content is for reference