ECS-2333-100-BN-TR Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are defined as electronic circuits that oscillate between two discrete values. The two most common types of oscillators are the analog and digital oscillators. The analog oscillators are usually used to generate signals at audible frequencies. On the other hand, digital oscillators are often used to generate signal that can be summarized in terms of numbers or equivalent patterns and values. One of the most popular digital oscillators is the ECS-2333-100-BN-TR.

The ECS-2333-100-BN-TR is an oscillator module designed for use in a microprocessor. It is a 3-phase, bi-directional, voltage-controlled oscillator (VCO). The VCO is composed of three voltage-controlled capacitor (VCC) cells, and a tristate output. It has a frequency range of 10 Hz to 100 kHz. Moreover, the ECS-2333-100-BN-TR has a low power consumption. The power consumption of this oscillator is only 3.3V.

This type of oscillator can be used in a variety of applications including, but not limited to, embedded systems, motor control, medical devices, navigation systems, cellular phones, and robotics. Additionally, it is suitable for high-precision time and frequency control applications such as phase shift keying (PSK) and run-time re-calibration.

The working principle of the ECS-2333-100-BN-TR is based on the charging and discharging of voltage-controlled capacitor cells. When the input voltage is applied to the oscillator, the current will flow through the capacitor cells and the output voltage will be developed across regenerative feedback loop which will oscillate between two states. The two outputs of the oscillator will be connected in parallel to form the “biphasic output”.

When the input voltage is varied, the frequency of the oscillation will vary according to the voltage. This is because the charging and discharging time of the capacitor will be shortened or lengthened according to the input voltage. As a result, the duty cycle of the waveform also varies according to the input voltage.

In addition, the ECS-2333-100-BN-TR has a tristate output that allows for better control of the frequency and duty cycle of the output waveform. The tristate output is used to enable or disable the output waveform. This feature allows for more precise control of the output waveform.

The ECS-2333-100-BN-TR oscillator is an advanced digital oscillator that can be used in a wide range of applications. It has the capability to operate over a wide frequency range and to provide precise control over the duty cycle of the output waveform. This makes it a highly desirable oscillator for embedded systems, motor control, medical devices, navigation systems, cellular phones, and robotics.

The specific data is subject to PDF, and the above content is for reference