Allicdata Part #: | X441-ND |
Manufacturer Part#: |
ECS-240-16-4 |
Price: | $ 0.48 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | CRYSTAL 24.0000MHZ 16PF T/H |
More Detail: | 24MHz ±30ppm Crystal 16pF 30 Ohms HC-49/US |
DataSheet: | ECS-240-16-4 Datasheet/PDF |
Quantity: | 37 |
1 +: | $ 0.43470 |
10 +: | $ 0.36225 |
Series: | HC-49US |
Packaging: | Bulk |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 24MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 16pF |
ESR (Equivalent Series Resistance): | 30 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -10°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-49/US |
Size / Dimension: | 0.447" L x 0.183" W (11.35mm x 4.65mm) |
Height - Seated (Max): | 0.138" (3.50mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are widely used in industry due to their ability to convert electrical signals into usable energy. In addition, crystals can be used to store and transfer information which makes them invaluable components in electronic equipment. The ECS-240-16-4 Crystal is one of the most commonly used crystals in electronic applications.
The ECS-240-16-4 Crystal is a highly efficient crystal oscillator with a high stability frequency of 16.384 MHz. This crystal is available in three configurations, the X-IN, Y-IN and RGB, and provides excellent linearity over all temperature ranges between -20 and 85 degrees Celsius.
The ECS-240-16-4 Crystal is a quartz crystal that is commonly used for oscillators and time base circuits, as well as for frequency synthesisers and filters. In order to understand the basic concept of how a crystal oscillator works, it is important to understand the concept of oscillator circuit. An oscillator circuit consists of an oscillator device such as a quartz crystal and other components such as resistors and capacitors.
The quartz crystal is a passive component that acts as a filter, allowing a certain frequency to pass without any distortion. The frequency of the output of the crystal is determined by its cut angle, size, and shape and is referred to as the natural frequency. The crystal operates as an active component when connected to an oscillator circuit comprising resistors and capacitors. The resistors and capacitors connected to the crystal change the impedance of the crystal and this change in impedance causes the crystal to vibrate at its natural frequency, thus producing the output signal.
The ECS-240-16-4 Crystal is often used in applications such as microcontrollers and communication systems where precise timing is essential. It is also used in frequency synthesisers and filters, which are devices used to control the frequencies in a radio, allowing for precise tuning and transmission of signals.
The ECS-240-16-4 Crystal is a highly efficient crystal oscillator that has been designed for use in applications requiring precise timing. The crystal is available in three configurations and provides excellent linearity over all temperature ranges. The crystal is used in many applications such as microcontrollers, communication systems, frequency synthesisers and filters, providing precise timing and tuning of radio signals.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...