ECS-240-20-5PX-TR Crystals, Oscillators, Resonators |
|
Allicdata Part #: | XC1255TR-ND |
Manufacturer Part#: |
ECS-240-20-5PX-TR |
Price: | $ 0.16 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | CRYSTAL 24.0000MHZ 20PF SMD |
More Detail: | 24MHz ±30ppm Crystal 20pF 30 Ohms HC-49/US |
DataSheet: | ECS-240-20-5PX-TR Datasheet/PDF |
Quantity: | 7000 |
1000 +: | $ 0.15120 |
3000 +: | $ 0.14175 |
5000 +: | $ 0.13703 |
10000 +: | $ 0.13230 |
Series: | CSM-7X |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 24MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 20pF |
ESR (Equivalent Series Resistance): | 30 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -10°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | HC-49/US |
Size / Dimension: | 0.449" L x 0.189" W (11.40mm x 4.80mm) |
Height - Seated (Max): | 0.169" (4.30mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals have been used for many years in the industrial and technological fields for a variety of applications including clocks, radios, electronic timers and counters. The ECS-240-20-5PX-TR crystal has been designed specifically for use in communication and navigation systems. This type of crystal has been extensively used in navigation and short range radio systems and is suitable for operation in extreme temperatures ranging from -20 degrees Celsius to +85 degrees Celsius.
The ECS-240-20-5PX-TR crystal is a low-cost device designed for applications in communications and navigation systems. The crystal is made up of two pieces of quartz (SiO2) which are cut in a specific way to create a resonator. The resonator is then attached to electrodes which act as the two conductive plates for the crystal. The resonator is held in place between the two electrodes by a spacer and the entire assembly is enclosed in a sealed housing.
The working principle of the ECS-240-20-5PX-TR crystal is based on the fact that when an electrical current is applied to the electrodes, the quartz which makes up the resonator is driven to vibration at a specific frequency. This vibration is then used to generate an alternating current (AC) signal which is then used in navigation and communication systems.
The ECS-240-20-5PX-TR crystal has a wide range of uses in navigation and communication systems. It can be used to generate pulses for controlling timing of navigation and communication systems, as well as for the synchronization of communications modems. The crystal can also be used for the generation of very precise frequencies for use in radio receivers, transmitters, and frequency modulation (FM) systems.
The ECS-240-20-5PX-TR crystal has a much higher frequency accuracy than other crystals, which makes it an ideal choice for many applications. The device also has a very low power consumption which ensures its efficient operation even in very cold or hot temperatures. The crystal can also be configured to produce multiple frequencies, eliminating the need for multiple crystals.
The ECS-240-20-5PX-TR crystal is an ideal choice for applications which require high accuracy and reliability. The device is not only suitable for use in navigation and communication systems, but can also be used in other applications such as medical devices, industrial and consumer electronics, and automotive systems. The crystal can also be used as an oscillator for generating accurately timed signals and is suitable for many types of digital control systems.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...