Allicdata Part #: | XC1006-ND |
Manufacturer Part#: |
ECS-270-18-4X-F |
Price: | $ 0.48 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | CRYSTAL 27.0000MHZ 18PF T/H |
More Detail: | 27MHz ±30ppm Crystal 18pF 30 Ohms HC-49/US |
DataSheet: | ECS-270-18-4X-F Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.43470 |
10 +: | $ 0.36225 |
50 +: | $ 0.32609 |
100 +: | $ 0.28980 |
500 +: | $ 0.27531 |
1000 +: | $ 0.23184 |
2500 +: | $ 0.21735 |
5000 +: | $ 0.21011 |
10000 +: | $ 0.20286 |
Series: | HC-49USX |
Packaging: | Bulk |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 27MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 30 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -10°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-49/US |
Size / Dimension: | 0.447" L x 0.183" W (11.35mm x 4.65mm) |
Height - Seated (Max): | 0.138" (3.50mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
ECS-270-18-4X-F Application Field and Working Principle
The ECS-270-18-4X-F is an AT-cut crystal device manufactured by the ECS corporation. It is a hermetically sealed quartz crystal resonator device working in the AT cut frequency range of 10~200kHz. The ECS-270-18-4X-F is optimized for electronic timekeeping devices, and provides a reliable, low noise signal source.
Application Field
The ECS-270-18-4X-F is used mainly in various timekeeping applications, including quartz watches and clocks, frequency counters, stopwatches, timers, and control systems. It is also used in instrumentation equipment and precision oscillator circuits.
Working Principle
At the basic level, the working principle of the ECS-270-18-4X-F is based on the fact that an AC electric field, when passed through a quartz crystal, will cause it to vibrate at a certain frequency. This frequency is determined by the dimensions of the crystal and its environment. A certain frequency is generated when an electrical current passes through electrodes mounted on the crystal, causing the electrodes to be electrically polarized and generating a strain. The strain causes a frequency shift in the crystal\'s vibration, and this shift can be used to accurately measure the frequency of the electric field passing through the crystal.
The ECS-270-18-4X-F is able to generate a very stable frequency because it is hermetically sealed in an air tight package. The package ensures absence of physical and chemical interference, thereby enhancing stability and reducing the probability of frequency drift. Additionally, the quartz crystal resonator is precision designed to work in AT cut frequency range of 10~200kHz. This type of crystal is best suited for timekeeping applications due to its low cost and wide frequency range.
Conclusion
In conclusion, the ECS-270-18-4X-F is a reliable and cost-effective AT cut quartz crystal resonator device best suited for timekeeping applications. Its hermetic sealing protects it from the outside environment, providing a stable and low noise signal source.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...