ECS-270-20-20A-F

Series:	CSM-8
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	27MHz
Frequency Stability:	±50ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	20pF
ESR (Equivalent Series Resistance):	40 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-10°C ~ 70°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	2-SMD, No Lead
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Height - Seated (Max):	0.067" (1.70mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ECS-270-20-20A-F Application Field and Working Principle

Crystals, also known as quartz crystals, are natural pieces of quartz that have been cut to a desired size for use in electronic and electronic oscillators. They are the most essential components in most electronic circuits, especially those that require an oscillation or frequency stability. The most common application of these crystals is the use of quartz crystals to generate accurate and reliable signals for the timing of electronic communication and computer systems.ECS-270-20-20A-F is a common crysta l that is used in many oscillator applications. This type of crystal is made from an alloy of zinc and aluminum, with a monocrystalline quartz crystal dielectric. The alloy is chosen to ensure the magnetostriction properties of the alloy and, at the same time, the zinc and aluminum content allows for the electrical, thermal and mechanical properties of the quartz crystal to be adapted and tailored to a specific application. The alloy is then cut into a shape to fit the desired application.The working principle of the ECS-270-20-20A-F varies from application to application. In general, this crystal is primarily used to actively stabilize the frequency of an oscillator. This is done by actively tuning the resonance frequency of the crystal. This is done through the use of an electrical current that is applied to the crystal structure. As the current is applied, the distortion of the current waveform is tuned to a specific frequency. This tunable oscillator can then be used to stabilize the frequency of the oscillator, allowing for extremely accurate and reliable operation.The ECS-270-20-20A-F crystal is also used in other applications as well, such as the generation of a reference frequency to be used in the design of a phase-locked circuit, the production of a mixer, or the modulation of a transmission signal. In fact, the vast majority of modern crystal-controlled electronics use the ECS-270-20-20A-F crystal. They are widely used for their ability to provide an accurate, repeatable, and reliable output signal with a high level of precision.Because of its wide range of applications, the ECS-270-20-20A-F is widely used in both commercial and home electronic projects. This crystal is also used in a wide range of communication systems, including microwave systems, radio broadcasting, television, and cellular phone systems. This crystal is also found in many medical devices and laboratory equipment, as well as in military and aerospace applications.The main advantage of using a crystal such as the ECS-270-20-20A-F is that it is highly reliable and accurate. This crystal is also well-suited for application in very demanding environments, such as high-reliability medical and aerospace applications. The crystal is also well-suited for use in situations where high temperature operation is required. Additionally, it is very cost-effective and energy efficient, since the circuits that use this crystal require very low power consumption. This makes the ECS-270-20-20A-F a very attractive choice for many applications.

The specific data is subject to PDF, and the above content is for reference