Allicdata Part #: | XC1765-ND |
Manufacturer Part#: |
ECS-270-20-46X |
Price: | $ 0.34 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | CRYSTAL 27.0000MHZ 20PF T/H |
More Detail: | 27MHz ±30ppm Crystal 20pF 50 Ohms HC-46/X |
DataSheet: | ECS-270-20-46X Datasheet/PDF |
Quantity: | 667 |
1 +: | $ 0.30870 |
10 +: | $ 0.25578 |
50 +: | $ 0.23033 |
100 +: | $ 0.20475 |
500 +: | $ 0.19452 |
Series: | HC-46X |
Packaging: | Bulk |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 27MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 20pF |
ESR (Equivalent Series Resistance): | 50 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -10°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-46/X |
Size / Dimension: | 0.268" L x 0.157" W (6.80mm x 4.00mm) |
Height - Seated (Max): | 0.071" (1.80mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
ECS-270-20-46X is a miniature CMOS clock oscillator for use in 1.8, 2.5, 3.3 and 5.0V applications. It is a cost-effective solution for customized time base and clock application requirements.
The ECS-270-20-46X operates from a low-Cost, low-theta, low-ESR surface-mount crystal, with a frequency tolerance of up to ±100ppm and a frequency range of 10MHz - 27MHz. It is a hermetically sealed package with an operating temperature range of -10 to +70˚C.
The ECS-270-20-46X applications include: embedded controllers, cellular phones, micro-controllers, disk drives, wind turbine controllers, and many other applications. The device is also widely used in military and aerospace applications, with its high stability, low jitter, low EMI and low power consumption.
The working principle of ECS-270-20-46X is simple and effective. The quartz crystal used in ECS-270-20-46X will resonate at a certain frequency. A voltage-controlled oscillator (VCO) controls the frequency output from the crystal oscillator. The VCO is connected to the crystal oscillator via an amplifier. This amplifier amplifies the frequency signal from the crystal oscillator to a higher voltage level, which is then used as the output signal from the ECS-270-20-46X. The frequency output from the device is further stabilized by an external capacitor or resistor to reduce noise and temperature fluctuation.
In addition, ECS-270-20-46X also supports various programming modes including single-ended, dual-ended and parallel programming. With its wide frequency range, low jitter and low EMI, it is an ideal choice for high precision and low power applications. It is also reliable, with an MTBF of over 1 million hours.
In conclusion, the ECS-270-20-46X is a reliable and cost-effective solution for applications demanding high precision timing requirements. It has a special design combining low-cost quartz crystal with a higher level of frequency stability, low jitter and low EMI. With fast delivery and easy-to-program programming modes, the device is well suited for a wide range of applications, including embedded controllers, cellular phones, microcontrollers and disk drives.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...