ECS-3953M-480-AU-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic devices that result in a repetitive cyclic behavior due to their periodic nature. The ECS-3953M-480-AU-TR oscillator is a great example of this technology. It is a high-performance, low-power oscillator, designed for both automotive and industrial applications.

The design of the ECS-3953M-480-AU-TR is based on a modern architecture with advanced system integration. This oscillator relies on a voltage-controlled oscillator (VCO) & low-power oscillator (LPO) that are connected in an analog loop with a control gain. It also includes a temperature sensor circuit that is capable of sensing temperatures as low as -25°C, which allows for the adjustment of frequency and ensures that it remains constant even when temperatures change.

The ECS-3953M-480-AU-TR oscillator is capable of operating at a wide variety of frequencies, ranging from 2kHz to 48MHz, and can be powered by either a 3V or 5V supply voltage. This oscillator is designed to handle short-term load variations and is protected from surges and transients, which makes it an excellent choice for systems that require robust operation in harsh conditions. It has a maximum supply current of 4mA and a low current consumption of less than 50µA.

This oscillator is suitable for a range of automotive and industrial applications. It can be used to control RPM in engine systems, monitor frequencies in power supplies, trigger events for switching systems, or generate system tones for audio and video applications. It can also be used to synchronize clock signals for microcontrollers and microprocessors, as well as controlling clock speeds for gaming consoles.

The working principle of the ECS-3953M-480-AU-TR oscillator is based on the principle of resonant oscillation. The VCO and LPO are the two main oscillators in its loop architecture. The VCO is a voltage-controlled device that is providing the main amplification and regulation of the oscillation, and the LPO is providing the fine calibration and offset to the oscillation as needed. Both of these oscillators are connected in an analog loop and their frequency is controlled by the voltage used to power their circuitry.

The voltage is boosted up and down by the control gain setting and this controls the frequency. When the control gain is too low, the frequency will start to drift up or down. When the control gain is set correctly, then the frequency will remain stable across different voltages and frequencies. The LPO helps to fine-tune the frequency to ensure accuracy.

In summary, the ECS-3953M-480-AU-TR is a high-performance, low power, and robust oscillator that is suitable for a wide variety of automotive and industrial applications. Its advanced architecture and circuitry provide reliable operation in a wide range of temperatures and environmental conditions. Its working principle is based on the principle of resonant oscillation, which allows for precise control of frequencies and accurate performance without sacrificing power consumption.

The specific data is subject to PDF, and the above content is for reference