Allicdata Part #: | XC1259TR-ND |
Manufacturer Part#: |
ECS-40.3-S-5PX-TR |
Price: | $ 0.16 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | CRYSTAL 4.0320MHZ SERIES SMD |
More Detail: | 4.032MHz ±30ppm Crystal Series 150 Ohms HC-49/US |
DataSheet: | ECS-40.3-S-5PX-TR Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.15120 |
Series: | CSM-7X |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 4.032MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | Series |
ESR (Equivalent Series Resistance): | 150 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -10°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | HC-49/US |
Size / Dimension: | 0.449" L x 0.189" W (11.40mm x 4.80mm) |
Height - Seated (Max): | 0.169" (4.30mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are one of the oldest and most reliable technologies for a wide range of applications. From watches to precision medical equipment, crystal oscillators can provide highly accurate and reliable frequency signals. The development of the ECS-40.3-S-5PX-TR crystal oscillator has opened up a whole new range of possibilities, allowing for more precise applications.
An ECS-40.3-S-5PX-TR crystal oscillator is a precision oscillator designed for use in a wide range of applications requiring highly accurate and reliable frequency signals. This type of oscillator utilizes a specialized quartz crystal to produce a signal with a very consistent frequency. This crystal is cut parallel to the C-axis in the direction of the C-axis or X-axis.
The crystal rests between two plates of a specially designed oscillator circuit. As the circuit applies voltage, electricity flows through the quartz molecule, creating a small electrical field. This field then causes the quartz crystal to vibrate at a very consistent frequency. The vibrational frequency is then converted into a digital signal and the output frequency is determined by an ECS oscillator circuit.
The ECS-40.3-S-5PX-TR crystal oscillator is primarily used in communication and telecommunication systems as frequency control elements. These oscillators are very stable, accurate and provide good frequency stability. They are used in military radios and radios for commercial aircraft, as well as in satellite communication systems. In addition, they are used in wireless networks, cellular phones and wireless sensor networks.
The ECS-40.3-S-5PX-TR crystal oscillator is also commonly used in power system and automotive applications. These oscillators can be used to provide timing signals for fuel injection systems, measure the engine speed of cars, and help coordinate all of the systems in a vehicle. They can also be used to provide a reference signal for power conditioning systems.
The ECS-40.3-S-5PX-TR crystal oscillator can also be used in medical devices such as medical imaging and cardiac monitoring systems. The highly stable and accurate frequency generated by the oscillator can be used to provide precise timing data to a variety of medical systems. In addition, the oscillator can be used in analyzers and laboratories, where precise timing is of the utmost importance.
The ECS-40.3-S-5PX-TR crystal oscillator is a reliable and highly accurate oscillator that is well suited for a wide range of applications. Its accuracy and stability make it a valuable asset for industries that require precision and reliable frequency signals. This type of crystal oscillator is certainly a great solution for many applications in the modern world.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...