| Allicdata Part #: | XC735TR-ND |
| Manufacturer Part#: |
ECS-80-18-5PDN-TR |
| Price: | $ 0.41 |
| Product Category: | Crystals, Oscillators, Resonators |
| Manufacturer: | ECS Inc. |
| Short Description: | CRYSTAL 8.0000MHZ 18PF SMD |
| More Detail: | 8MHz ±30ppm Crystal 18pF 60 Ohms HC-49/US |
| DataSheet: |  ECS-80-18-5PDN-TR Datasheet/PDF |
| Quantity: | 5000 |
| 1000 +: | $ 0.36855 |
| 3000 +: | $ 0.35627 |
| 5000 +: | $ 0.34398 |
| 10000 +: | $ 0.33170 |
| Series: | CSM-7 |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Type: | MHz Crystal |
| Frequency: | 8MHz |
| Frequency Stability: | ±100ppm |
| Frequency Tolerance: | ±30ppm |
| Load Capacitance: | 18pF |
| ESR (Equivalent Series Resistance): | 60 Ohms |
| Operating Mode: | Fundamental |
| Operating Temperature: | -40°C ~ 85°C |
| Ratings: | -- |
| Mounting Type: | Surface Mount |
| Package / Case: | HC-49/US |
| Size / Dimension: | 0.449" L x 0.189" W (11.40mm x 4.80mm) |
| Height - Seated (Max): | 0.169" (4.30mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are used in electronic technology in order to achieve a specific frequency of oscillation. The ECS-80-18-5PDN-TR is a crystal oscillator that is suited for power management and displays applications in general. It has a built-in voltage regulator, making it a perfect choice for other applications that require a stable power supply.
The ECS-80-18-5PDN-TR is a small-package crystal oscillator with an 18-pin DIP package. It is designed to operate with a single 5 Volt supply and produces a sine wave signal at 80MHz. This signal is ideal for driving digital displays or providing a stable timing source for micro-processor based systems.
The oscillator uses a standard quartz crystal element to provide an extremely accurate frequency output. The quartz crystal is mounted on an oscillator circuit board, which is then connected to the required conductor pins. The pins of the oscillator form two capacitors, one on each side of the crystal, which create an alternating current in the quartz crystal itself. This current oscillates at its natural frequency, which is determined by the physical size of the crystal.
The sine wave signal is generated by two inverters, each of which is triggered by a different half cycle of the alternating current. The two cycles are 180 degrees out of phase with each other, producing the sine wave output. The amplitude of the signal is adjustable via a trimmer capacitor on the oscillator board.
The ECS-80-18-5PDN-TR is single-ended, meaning that it does not require any differential between the output and ground. This makes it ideal for use with logic devices that are not designed to use differential inputs. The output impedance of the oscillator is adjustable, making it suitable for a wide range of power management and display applications.
The ECS-80-18-5PDN-TR is the ideal solution for crystal oscillator applications that require a small form factor, low cost, and simple installation. It provides an accurate frequency output, adjustable output power, and adjustable output impedance. This makes it an excellent choice for a wide variety of timing and power management applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...