ECS-98.3-S-1X Allicdata Electronics
Allicdata Part #:

X981-ND

Manufacturer Part#:

ECS-98.3-S-1X

Price: $ 0.41
Product Category:

Crystals, Oscillators, Resonators

Manufacturer: ECS Inc.
Short Description: CRYSTAL 9.8304MHZ SERIES T/H
More Detail: 9.8304MHz ±30ppm Crystal Series 35 Ohms HC-49/U
DataSheet: ECS-98.3-S-1X datasheetECS-98.3-S-1X Datasheet/PDF
Quantity: 79
1 +: $ 0.37800
10 +: $ 0.31500
50 +: $ 0.28350
Stock 79Can Ship Immediately
$ 0.41
Specifications
Series: HC-49UX
Packaging: Bulk 
Part Status: Active
Type: MHz Crystal
Frequency: 9.8304MHz
Frequency Stability: ±50ppm
Frequency Tolerance: ±30ppm
Load Capacitance: Series
ESR (Equivalent Series Resistance): 35 Ohms
Operating Mode: Fundamental
Operating Temperature: -10°C ~ 70°C
Ratings: --
Mounting Type: Through Hole
Package / Case: HC-49/U
Size / Dimension: 0.447" L x 0.183" W (11.35mm x 4.65mm)
Height - Seated (Max): 0.530" (13.46mm)
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are an important part of many electronic devices, as they help to regulate the oscillation of their circuits. The ECS-98.3-S-1X is an oscillator crystal that is used in many applications. It has a low power dissipation and low current drive.

The ECS-98.3-S-1X is a frequency-controlled timing device that is composed of a series of four resonators. The resonators are grouped into two sections; the series resonator, and the shunt resonator. These resonators are connected in parallel and operate with a very low power dissipation and a low current drive of 7.5mA.

The series resonator is designed to oscillate at an initial frequency determined by the characteristic impedance of each component. This initial frequency is then amplified by the shunt resonator and is then used to control the frequency of the oscillator. This oscillator can be used to regulate the frequency of a wide range of electronic components such as power amplifiers, microprocessors, and radio receivers.

The ECS-98.3-S-1X is also used in microprocessors to maintain the processor clock frequency. It can be used in microcontrollers to time tasks, such as data transfer, that require precise timing. In radio receivers, it is used to control the frequency of the radio signal. It is also used to calibrate the accuracy of oscillators in precision timing applications such as atomic clocks, GPS systems, and digital timers.

The ECS-98.3-S-1X is also available in a wide range of package sizes and frequencies, allowing it to be used in a variety of applications. It is designed to operate with a power supply voltage range of 5 to 24 volts and a temperature range of -40°C to 80°C. It has low phase noise characteristics, and its rise and fall times are less than one microsecond.

The ECS-98.3-S-1X is an excellent choice for many applications requiring precise timing or frequency control. It is capable of providing accurate frequency control in a wide variety of applications, such as in microprocessors, radio receivers, and atomic clocks. With its low power dissipation and low current drive, the ECS-98.3-S-1X is a highly reliable and versatile crystal for any application requiring frequency control or precise timing.

The specific data is subject to PDF, and the above content is for reference

Latest Products
CSTCE8M59G55A-R0

Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...

CSTCE8M59G55A-R0 Allicdata Electronics
416F520X3CLT

CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...

416F520X3CLT Allicdata Electronics
416F500X3AKT

CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...

416F500X3AKT Allicdata Electronics
416F48022CKT

CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...

416F48022CKT Allicdata Electronics
416F44023ITT

CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...

416F44023ITT Allicdata Electronics
416F406X2AST

CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...

416F406X2AST Allicdata Electronics