Allicdata Part #: | ECS-P55-BN-ND |
Manufacturer Part#: |
ECS-P55-BN |
Price: | $ 4.54 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | OSC PROG HCMOS 5V 50PPM EN/DS |
More Detail: | XO (Standard) HCMOS 1MHz ~ 125MHz Programmable Osc... |
DataSheet: | ECS-P55-BN Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 4.08870 |
10 +: | $ 3.89214 |
50 +: | $ 3.79210 |
100 +: | $ 3.64241 |
500 +: | $ 3.49272 |
1000 +: | $ 3.09355 |
2500 +: | $ 2.99376 |
Frequency Stability: | -- |
Height: | 0.043" (1.09mm) |
Size / Dimension: | 0.197" L x 0.126" W (5.00mm x 3.20mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 50mA |
Spread Spectrum Bandwidth: | -- |
Operating Temperature: | -40°C ~ 85°C |
Frequency Stability (Total): | ±50ppm |
Series: | ECS-P55 |
Voltage - Supply: | 5V |
Output: | HCMOS |
Function: | Enable/Disable |
Available Frequency Range: | 1MHz ~ 125MHz |
Programmable Type: | Programmed by Digi-Key (Enter your frequency in Web Order Notes) |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Programmable Oscillators are electronic circuits used for generating a signal of fixed frequency. They consist of a frequency source and a counter, used for tuning the frequency output of the oscillator. The ECS-P55-BN is an example of a Programmable Oscillator, and its application field and working principle is based on the following components:
Primarily Components
The ECS-P55-BN consists of a crystal oscillator and a wide range of Programmable Oscillator components. The crystal oscillator provides the base signal frequency, and the Programmable Oscillator counter is used to adjust the frequency output to suit the requirements of the application. A range of programmable filters are also available to provide additional precision in tuning the output frequency.
Frequency Sources
The frequency source is the most important component of the ECS-P55-BN. It is designed to generate a signal of specific frequency, as determined by the user. The signal source is then connected to the counter, which is used to adjust the frequency to suit the application. Programmable Oscillators are available in both voltage and current-controlled frequency sources, with the voltage sources being the more common choice. In the case of the ECS-P55-BN, both types of frequency source can be used.
Counter and Filter Setup
The counter is used to program the frequency output of the ECS-P55-BN oscillator. The counter is set up with a range of programming commands that allow the user to adjust the frequency output within the range of values specified on the oscillator\'s spec sheet. The counter can also be set up to adjust the output frequency according to the pulse train output of an external timer or signal generator.
In addition to the counter, the Programmable Oscillator will also contain a range of programmable filters. These filters are designed to reduce the noise spikes and distortion that can occur in an oscillator\'s signal. The range of filters available will depend on the specific model, with the ECS-P55-BN being able to handle up to 10 kHz of filtering. The Programmable Oscillator can also be set up to run at multiple frequencies, by using additional filters.
Application Field and Working Principle
The ECS-P55-BN Programmable Oscillator has a wide application field and is suitable for both industrial and commercial applications. Its simple yet powerful design allows it to be used in a wide range of applications such as frequency detection, timekeeping, frequency control, and other frequency-dependent applications. The frequency output of the oscillator is controlled by the counter and filter setup, with the oscillator being able to produce signals of up to 10 kHz.
The working principle of the ECS-P55-BN is based on the crystal oscillator, counter and filter components. The crystal oscillator produces a signal of a given frequency, which is then adjusted by the counter to produce the desired frequency output. The filters are then used to reduce distortion and noise spikes in the signal. By changing the programming commands in the counter, the output frequency can be adjusted to suit the requirements of the application.
In conclusion, the ECS-P55-BN Programmable Oscillator is a powerful and versatile solution for applications requiring precise frequency control. Its use of a crystal oscillator, counter and filter provides an effective and efficient way of adjusting the output frequency and reducing noise and distortion. It is a perfect choice for applications requiring precise frequency control, and its wide application field makes it an ideal choice for both industrial and commercial applications.
The specific data is subject to PDF, and the above content is for reference
OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...
OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...
OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...
OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...
OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...
OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...