Allicdata Part #: | XC1472TR-ND |
Manufacturer Part#: |
ECS-PEC25-1062.5-B-N |
Price: | $ 6.60 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | ECS Inc. |
Short Description: | OSC XO 106.25MHZ PECL SMD |
More Detail: | 106.25MHz XO (Standard) PECL Oscillator 2.5V Enabl... |
DataSheet: | ECS-PEC25-1062.5-B-N Datasheet/PDF |
Quantity: | 500 |
500 +: | $ 6.00453 |
Frequency Stability: | ±50ppm |
Current - Supply (Disable) (Max): | 30µA |
Height - Seated (Max): | 0.067" (1.70mm) |
Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
Package / Case: | 6-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 90mA |
Operating Temperature: | -40°C ~ 85°C |
Series: | ECS-PEC25 |
Voltage - Supply: | 2.5V |
Output: | PECL |
Function: | Enable/Disable |
Frequency: | 106.25MHz |
Type: | XO (Standard) |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are electronic components that generate a periodic signal of a certain frequency and shape. The ECS-PEC25-1062.5-B-N is a variety of oscillator that has many uses in a variety of applications. To better understand its applications and construction, one must first understand its working principle.
An oscillator is an electrical circuit that converts a direct current source of a given frequency into a alternating current signal with the same frequency. It does this by passing the input signal through a high frequency capacitor and an RC network that determines the frequency. The output signal is simply taken off from the capacitor and filtered to produce the desired frequency.
The ECS-PEC25-1062.5-B-N oscillator is particularly useful in applications where frequency accuracy is important. Oscillators are used in the generation of precise clock signals and can also be used to measure certain frequencies, such as those produced by radio transmitters and receivers. They are also used in the production of high-speed frequency modulated signals. Oscillators are used to stabilize the output waveform of digital-to-analog converters and can be used to regulate the speed of an AC motor.
The ECS-PEC25-1062.5-B-N oscillator is a combination of crystal and Resistor-Capacitor (RC) network. The crystal used in this oscillator is a piezoelectric type which has the property of vibrating when an alternating current voltage is applied. The frequency of the oscillations is determined by the cut of the crystal which can be changed to suit any specific application. The RC network helps to set the frequency of the crystal and also helps to filter the output signal to the desired frequency.
In order to generate a precise frequency signal at the output, the oscillator also needs to monitor the oscillator’s performance. This is done by using an integrator circuit which continuously monitors the oscillator’s output and compares it to the desired frequency. When the output frequency deviates from the desired frequency, the integrator will adjust the crystal and RC network to bring the output signal back to the desired frequency.
The ECS-PEC25-1062.5-B-N oscillator is a versatile component which can be used in a wide range of applications. It is used in communications, instrumentation, and industrial control applications. It is also commonly used in digital systems where the frequency needs to be accurately maintained. This oscillator also finds applications in frequency synthesizers, microwave systems, frequency dividers, and precision reference generations.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...